Page History

The Queue length Sweethearting detection module module is configured on the settings panel of the Sweethearting detection object , which is created on the basis of created under the Camera object on the Hardware tab of the System settings dialog windowbox.

The Sweethearting detection module is configured as follows:

1. Go to the settings panel of the Sweethearting detection module.Image Removed
2. Click the Settings button (1).
   Image AddedClick Settings.
   The Detection settings window will open.
   
3. Specify the area of interest and the approximate size of people in the video imagedetection:
   1. Go to the Select area tab (1).
   2. Click Stop video to capture the video image (2).
   3. Click Area of interest (3).

   4. Using the left mouse button select the four corners of the area on Specify the area of interest in the captured video image to be analyzed. The selected area must comply with Camera and camera settings requirements for the Sweethearting detection module .

      Info
      title Note
      Only one area

      may

      can be

      so designated

      specified. If

      a

      the second area is specified, then the first area will be deleted.

      Upon selection of the area the remaining part of the video image will be dimmed.Note

      Info
      title	To remove a selected area, click the  button next to the Area of interest button.

      
      

4. On Go to the Parameters tab (4) , you can set tab and perform the folowing actions:
   Image Added

5. Specify the detection sensitivity in the range from 0.0 to 1.0 in the Detection sensitivity (0.0 - 1.0) parameter (5).

   Info
   title Note
   By default the 0.65 value is set in the Detection sensitivity (0.0 - 1.0) parameter. The value is found experimentally.

   
   

6. Specify the number of frames processed per second by the detcetion in the Maximum frame rate parameter (6).

   
   Image Removed

   Info
   title Note
   2-3 fps are enough for proper operation of the Sweethearting detection module.

   
   

7. Click OK to (7) to save changes and return to the settings panel of the Sweethearting detection object.

   Info
   title Note.
   To return to the control panel of the Sweethearting detection without saving changes, click Cancel.

   
   

8. On Click the Apply button (2) on the Sweethearting  detection control panel, click Apply.

Configuring the Queue length detection module is completeThe Sweethearting detection module is now configured.