Documentation for Detector Pack 2.7. Documentation for other versions of Detector Pack is available too.

Previous page Configuring the «Detection of moving against crowd flow» mоdule  Configuring the «Barcode detection» module Next page


The Sweethearting detection module is configured on the settings panel of the Sweethearting detection object created under the Camera object on the Hardware tab of the System settings dialog box.

The Sweethearting detection module is configured as follows:

  1. Go to the settings panel of the Sweethearting detection module.
  2. Click the Settings button (1).

    The Detection settings window will open.
  3. Specify the area of interest of the detection:
    1. Go to the Select area tab (1).
    2. Click Stop video to capture the video image (2).
    3. Click Area of interest (3).

    4. Specify the area of interest in the captured video image to be analyzed. The selected area must comply with Camera and camera settings requirements for the Sweethearting detection module .

      Note

      Only one area can be specified. If the second area is specified, then the first area will be deleted.

      To remove a selected area, click the  button next to the Area of interest button.

  4. Go to the Parameters (4) tab and perform the folowing actions:

  5. Specify the detection sensitivity in the range from 0.0 to 1.0 in the Detection sensitivity (0.0 - 1.0) parameter (5).

    Note

    By default the 0.65 value is set in the Detection sensitivity (0.0 - 1.0) parameter.

    The value is found experimentally.

  6. Specify the number of frames processed per second by the detcetion in the Maximum frame rate parameter (6).

    Note

    2-3 fps are enough for proper operation of the Sweethearting detection module.

  7. Click OK (7) to save changes and return to the settings panel of the Sweethearting detection object.

    Note

    To return to the control panel of the Sweethearting detection without saving changes, click Cancel.

  8. Click the Apply button (2) on the Sweethearting  detection control panel.

The Sweethearting detection module is now configured.