Page History

To configure the access plan of the Hikvision readerTo configure the Hikvision reader access plan settings, do the following:

1. Go to the settings panel of the Hikvision 28X Reader object setup panel26X Reader object.
   Image Modified
2. Click on the Access plan setup Image Added button. The Reader access plan setup window openswill open.Image Removed

3. In the area (1), set select the required access type.

   Info

   title	Note.

   The Sleep access type stands for the sleep mode. The reader is not operable in this mode.

   The Card + Pass access

   :
   Image Added

   1. Sleep—sleep mode. If you select this mode, the reader won't operate.
   2. Card + Pass—first you
   type means that you first
   1. need to swipe the card and then enter the password, only then the access
   is
   1. will be granted.
   2. Card—you need to swipe the card, after that the access will be granted.
   The
   1. Card/Auth.Pass
    access type means that you
   1. —you can either swipe the card
   OR
   1. or enter the password to access.
4. In the column (2), select the day of the week, and using the mouse,  set set the time interval for this access type in the corresponding line in the area (3).
5. If necessary, adjust the time interval in the area (4), where the left field indicates the beginning time, and the right field indicates the ending time of this time interval.
6. Click the OK (5) button to save the changes and return to the settings panel of the Hikvision reader.
7. Click Apply (2).

...

1. the Apply Image Added button on the settings panel of the reader.