Go to documentation repository
Page History
To create the Hands up detector, do the following:
- Create the Human pose detector (see Configuring the Human pose detector).
- Below the Human pose detector, click Create… → Hands up detector.
By default, the Hands up detector generates an event if there is a person with both hands raised The Hands up detection tool triggers if a person with one or both hands raised is detected in a specified area.
To configure the Hands up detection tool, do the following:
...
If necessary, you can change the detector parameters. The list of parameters is given in the table:
| Parameter | Value | Description |
|---|---|---|
| Other | ||
| Enable | Yes | The detector is enabled by default. To disable the detector, select the No value |
| No | ||
| Name | Hands up detector | Enter the detector name or leave the default name |
| Type | Hands up detector | Name of the detector type (non-editable field) |
| Basic settings | ||
| Event generation condition | Both hands | Select this value if you want the detector to generate an event only when a |
...
| person has both hands raised |
...
| One hand |
...
| Select this value if you want the detector to generate an event only when a person has either left or right hand raised | ||
| Only left | Select this value if you want the detector to generate an event only when a person has one selected hand raised | |
| Only right | ||
| Left hand | Select this value if you want the detector to generate an event only when a selected hand is raised | |
| Right hand | ||
| Number of measurements in a row to trigger detection | 2 | Specify the minimum number of frames with a person with a hand/hands raised for the detector to generate an event. The value must be in the range [1 |
...
, 20]. |
| Info | ||
|---|---|---|
| ||
|
To save the parameters of the detector, click the Apply 
button. To cancel the changes, click the Cancel 
button.
Configuration of the Hands up detector Configuring the Hands up detection tool is complete.
Overview
Content Tools