Page History

The Traffic analysis module program module is used to determine the general characteristics of the traffic in general flow as a whole and each vehicle in particular.

The Traffic analysis module has program module performs the following functions:

1. Detection of Detects a vehicle in the detector's operation area of the detection tool.
2. Detection of the road congestion and decrease in road capacity in each lane.
3. Detects the traffic flow density and sharp decrease of the road bandwidth on each traffic lane.
4. Detects the intentional vehicle stopping Detection of intentional stopping of vehicle on the roadway, on highways, as well as in other places where stopping and parking is are prohibited.
5. Automatic detection of Automatically detects the drop in of the traffic flow average speed of the traffic.
6. Detection of Detects the movement in the prohibited direction relative to the specified borders.Determining
7. Determines the class of the vehicle
.
8. :
   1. Light:
   Car
   2. 1. 1. Cars.
   Car
   3. 1. 1. Cars with a trailer.
      2. Average:
      Minibus
      3. 1. 1. Minibuses.
      Truck
      4. 1. 1. Trucks up to five tons.
         2. Truck:
            1. Small biaxial
      bus
      5. 1. 1. buses.
            2. Two-axle
      truck
      6. 1. 1. trucks.
            2. Three-axle
      truck
      7. 1. 1. trucks.
            2. Special vehicle.
         2. Large vehicle:
            1. Large
      biaxial bus
      8. 1. 1. buses.
            2. Tram.
      Trolleybus
      9. 1. 1. Trolleybuses.
            2. Truck or bus with a trailer.
            3. Large special vehicle.
         2. Mega-large vehicle:
            1. Mega-large
      bus
      10. 1. 1. buses.
             2. Mega-large
      truck
      11. 1. 1. road trains.
          2. Moto:
          Motorcycle
          3. 1. 1. Motorcycles/
          moped
          4. 1. 1. mopeds/
          quad
          5. 1. 1. quads/
          tricycle
          6. 1. 1. tricycles.
          Bicycle
          7. 1. 1. Bicycles.
                2. Scooter.
             2. Special transport:
             Special car
             3. 1. 1. Cars.
             Special minibus
             4. 1. 1. Minibuses.
             Special truck
             5. 1. 1. Trucks.
                   2. Other.
                2. Dump truck:
                   1. Two-axle dump
             truck
             6. 1. 1. trucks.
                   2. Three-axle dump
             truck
             7. 1. 1. trucks.
                   2. Four-axle dump
             truck
             8. 1. 1. trucks.
             9. Registration of Registers the exceeding of the maximum allowable speed limit.
             10. Detection of Detects the traffic accidents.
             11. Detection of Detects the lost cargo.

             You can use the following tools to create reports on results of the detection tool detector operation:

             1. The WEB Report System PSIM module. This module isn't included in the Auto PSIM distribution package and must be installed separately (see WEB Report System PSIM).
             2. The Traffic Monitoranalysis monitor object. Configuration of this object is described in The Traffic Monitor interface object setup. Working with the Traffic Monitor is described in For the information on how to configure this object, see the The Traffic analysis monitor interface window section; to work with the dialog window, see Operator's Guide.