Functionality of the Traffic analysis program module

The Traffic analysis program module is used to determine the general characteristics of the traffic flow as a whole and each vehicle in particular.

The Traffic analysis program module performs the following functions:

1. Detects a vehicle in the detector's operation area.
2. Detects the traffic flow density and sharp decrease of the road bandwidth on each traffic lane.
3. Detects the intentional vehicle stopping on the roadway, on highways, as well as in other places where stopping and parking are prohibited.
4. Automatically detects the drop of the traffic flow average speed.
5. Detects the movement in the prohibited direction relative to the specified borders.
6. Determines the class of the vehicle:
   1. Light:
      1. Cars.
      2. Cars with a trailer.
   2. Average:
      1. Minibuses.
      2. Trucks up to five tons.
   3. Truck:
      1. Small biaxial buses.
      2. Two-axle trucks.
      3. Three-axle trucks.
      4. Special vehicle.
   4. Large vehicle:
      1. Large buses.
      2. Tram.
      3. Trolleybuses.
      4. Truck or bus with a trailer.
      5. Large special vehicle.
   5. Mega-large vehicle:
      1. Mega-large buses.
      2. Mega-large road trains.
   6. Moto:
      1. Motorcycles/mopeds/quads/tricycles.
      2. Bicycles.
      3. Scooter.
   7. Special transport:
      1. Cars.
      2. Minibuses.
      3. Trucks.
      4. Other.
   8. Dump truck:
      1. Two-axle dump trucks.
      2. Three-axle dump trucks.
      3. Four-axle dump trucks.
7. Registers the exceeding of the maximum allowable speed limit.
8. Detects the traffic accidents.
9. Detects the lost cargo.

You can use the following tools to create reports on results of the detector operation:

1. The WEB Report System PSIM module. This module isn't included in the Auto PSIM distribution package and must be installed separately (see WEB Report System PSIM).
2. The Traffic analysis monitor object. For the information on how to configure this object, see the The Traffic analysis monitor interface window section; to work with the dialog window, see Operator's Guide.