Page History

Configure the video parameters as follows: 

1. In the field (1), select the fps rate

The mobile iOS Client allows restricting video playback fps and resolution (both in live video mode and when reviewing recorded video). These restrictions are recommended when your mobile device has a slow Internet connection.

To restrict video parameters, do the following:

1. Select max.fps when connecting to Internet via WiFi and 3G: Maximum: 9 fps, Medium: 6 fps, Slow: 3 fps.
   Image RemovedImage Added

   Info
   title Note.
   These settings are valid only when connection connecting to the Intellect software package is established.

   
   

2. In the Quality group select Select the video resolution while viewing video from one camera (the Resolution setting) and while displaying video from several cameras (Resolution in multiview setting)(2):
   1. Auto - when your mobile device has a slow Internet connection, the degradation of image quality algorithm is applied for the image resolution .SQCIF - display video with constant resolution 126 × 96 (for multiview only(1).
   2. QCIF - display video with constant resolution 176 × 144 (2).CIF

   3. Max -

       display

      display video with

      constant

      original resolution

      352 × 288 (for multiview only).
   4. 4CIF - display video with constant resolution 704 × 576 (for multiview only).

   5. (3).
      Image Added

      Info
      title Note
      These restrictions are recommended when your mobile device has a slow Internet connection.

      
      

3. Select one of the following playback formats in the Video parameter (1):
   Image Added

   • MJPEG

   • MJPEG ffmpeg

   • H.264 RTSP (ffmpeg) — the video is displayed in the original format via the RTSP protocol;

   • MP4 (ffmpeg) — less resource-intensive than mjpeg, supports the H.265 codec.

   Info
   title Note
   Displaying the video in the original resolution is enabled only for the H.264 RTSP (ffmpeg) format. Using this format, it is also possible to receive audio from the Axxon Next Server for the cameras with h.264 stream.

   
   

   Info
   title Note
   If the MP4 (ffmpeg) format is selected and the camera uses the H.265 stream, it is not recommended to disable the HW decoder (2).

   Image Added

   
   

4. If the H.264 RTSP (ffmpeg) format is selected:
   1. Disable the H.264 HW decoder if required (2). 

   2. Specify the RTSP port set in Intellect settings (3, see Configuring rtsp Server module). 

      Max - display video with original resolution.
      Image Removed