Versions Compared

Old Version 2

changes.mady.by.user Darya Andryieuskaya

Saved on

compared with

New Version Current

changes.mady.by.user Alena Kniazeva

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Section


Column
width35%50%


Panel
borderColor#CCCCCC
bgColor#FFFFFF
titleBGColor#F0F0F0
borderStylesolid
titleOn the page:
Table of Contents



Column


To configure the access of several operator workstations to the same interfaces, the corresponding displays are to should be assigned to these workstations. This can be done manually for each Display or display, via the display assigning Wizard or via the display activation.

Assigning displays manually

The displays can be assigned to the workstations on the settings panel of the Display object. Figures The figure below show shows the configuration of two objects: Display 1 and Display 2. According to the configuraton, the Display 1 will be available for both workstationsto all computers of the video surveillance system, while the Display 2 will be available only for to the COMPUTER 2 workstation computer.

Image ModifiedImage Removed

Info
titleNote.
 If If the display assigning is performed from the Server which is not connected with some Servers of the distributed system (the corresponding checkbox in the Architecture tab is not set – — see the Configuring the interaction of distributed system components section), the data from this Server will not be displayed in the list of computers to which the current Display can be assigned. Settings The settings of these Servers will not change after completing the display allocationassignment.

Assigning displays via Wizard

Assign To assign the displays to computers via Wizard as follows, do the following:

  1. Click the Wizard button on the Interfaces Interfaces tab (1). The Display settings window opens.
    Image RemovedImage Added
  2. Select the computer in the Computer column (2).
  3. Set check boxes the checkboxes next to Displays the Display objects to assign them to the selected computer (3).

  4. Repeat steps 2-3 for all required Computer objects.

    Info
    titleNote.

    Use the Copy (4) and Paste (5) buttons to copy the display list between computers. For example, to assign the same displays to the WS2 COMPUTER 2 computer as those assigned to the S-UYUTOVA COMPUTER computer, do the following:

    1.  Select S-UYUTOVA Select the COMPUTER computer in the Display settings dialog box.
    2. Click the Copy button (4).
    3. Select WS2 the COMPUTER 2 computer in the Display settings dialog box.
    4. Click the Paste button (5).


  5. Click the OK button (6).

Assigning the displays via Wizard is now complete.

Assigning displays via display activation

Assigning the displays via the display activation allows displaying the objects of several displays simultaneously. Assign the displays via the display activation as follows:

  1. Select the Display object on the Interfaces tab. In the +Activate table in the Number column, select the display number from the drop-down list (1).
    Image Added
  2. In the Name column (2), select the display name from the drop-down list.
  3. Click the Apply button (3).

According to this configuration, when the Display 1 is displayed, both the Display 1 and the Display 2 objects will be displayed.

Info
titleNote

To delete the display from the +Activate table, click on the corresponding line and press Ctrl+Del on the keyboard.

Assigning the displays via the display activation is now completeDisplays are now assigned to computers.