Go to documentation repository
Page History
To create the People counter detector, do the following:
- Create the Human pose detector (see Configuring the Human pose detector).
- Below the Human pose detector, click Create… → People counter.
People counter The People counter detection tool counts the number of people in the specified area using the pose detection metadata.metadata of the Human pose detector.
An event, on the basis of which a macro can be started (see Configuring start conditions), can be generated if the number of people in the frame meets the specified conditionsA macro triggers when the number of individuals in FOV matches the predefined conditions (see Configuring filters for event-driven macros).
| Info | ||
|---|---|---|
| ||
|
To configure the People counter detection tool, do the following:
...
If necessary, you can change the detector parameters. The list of parameters is given in the table:
| Parameter | Value | Description |
|---|---|---|
| Object features | ||
| Record mask to archive | Yes | Mask is recorded to the archive by default. To disable the parameter, select the No value |
| No | ||
| Other | ||
| Enable | Yes | The detector is enabled by default. To disable the detector, select the No value |
| No | ||
| Name | People counter | Enter the detector name or leave the default name |
| Type | People counter | Name of the detector type (non-editable field) |
| Basic settings | ||
| Alarm when value | In range | Specify when the detector must generate an event: |
Set the People counter detection tool triggering condition:
...
| when the number of people in the specified area is within the set range |
...
| or out of the |
...
| range | ||
| Out of range | ||
| End value of alarm range settings | 100 | Specify the range of the number of people in |
...
| the frame. The value |
...
| must be in the range [0 |
...
| , 100] |
...
| Event interval | 1 | Specify the |
...
interval in seconds between two consecutive |
...
events of the |
...
detector when the number of |
...
people in |
...
the frame continuously |
...
meets the specified conditions. The value |
...
must be in the range [1 |
...
, 10000] |
...
| Number of measurements in a row to trigger detection | Specify |
...
the minimum number of frames |
...
with the set number of people |
...
for the detector to generate an event. The value must be in the range [1 |
...
, 20]. |
...
The recommended (default) value is 2. | ||
| Start value of alarm range settings | 5 | Specify the range of the number of people in the frame. The value must be in the range [0, 100] |
By default, the entire
...
frame is the area for detection. In the preview window, you can specify the areas for detection using the anchor points 
(see Configuring a detection area).
...
| Info | ||
|---|---|---|
| ||
|
To save the parameters of the detector, click the Apply 
button. To cancel the changes, click the Cancel 
button.
Configuration of the People counter is complete.
In the Surveillance window on the layout next to the counter icon, you can add text and the number of people counted by the detector (see Displaying the number of detected objects).
Configuring the People counter detection tool is complete.
To display the number of counted people in the layout editing mode (see Switching to layout editing mode), you need to place the counter icon anywhere within the layout cell and save the layout. As a result, the number of people counted by the detection tool will be displayed next to the counter icon.
Overview
Content Tools