Page History
Configure the video parameters as follows:
In the field (1), select the fps rate when connecting to Internet via WiFi
The mobile iOS Client allows restricting video playback fps and resolution (both in live video mode and when reviewing recorded video). These restrictions are recommended when your mobile device has a slow Internet connection.
| Info | ||
|---|---|---|
| ||
These settings are valid only when connection to the Intellect software package is established. |
To restrict video parameters, do the following:
- In the upper-right corner, tap the Settings button.
- In the main menu, select Settings.
- Select the maximum video playback fps applicable when the mobile device is connected to the Internet via Wi-Fi
and 3G: Maximum: 9 fps, Medium: 6 fps, Slow: 3 fps.
Info title Note These settings are valid only when connecting to the Intellect software package.
- Select the video resolution (2):
- Auto - when your mobile device has a slow Internet connection, the degradation of image quality algorithm is applied for the image resolution (1).
- QCIF - display video with constant resolution ( 176 × 144 ) (2).
Max - display video with original resolution (3).
Info title Note These restrictions are recommended when your mobile device has a slow Internet connection.
Select one of the following playback formats in the Video parameter (1):
MJPEG
MJPEG ffmpeg
H.264 RTSP (ffmpeg) — the video is displayed in the original format via the RTSP protocol;
MP4 (ffmpeg) — less resource-intensive than mjpeg, supports the H.265 codec.
Info title Note Displaying the video in the original resolution is enabled only for the H.264 RTSP (ffmpeg) format. Using this format, it is also possible to receive audio from the Axxon Next Server for the cameras with h.264 stream.
Info title Note If the MP4 (ffmpeg) format is selected and the camera uses the H.265 stream, it is not recommended to disable the HW decoder (2).
- If the H.264 RTSP (ffmpeg) format is selected:
- Disable the H.264 HW decoder if required (2).
Specify the RTSP port set in Intellect settings (3, see Configuring rtsp Server module).