Page History

1

Identification number*

Automatically

Displays the identification identification number of the RTSP Server object in the digital video surveillance system

Numbers, letters, periods, hyphen, dash, and underscore

-NA

Depends on the number of the RTSP Server objects in the digital video surveillance system

2

Name*

Enter the value into the field

Sets Specifies the name of the RTSP Server object in the digital video surveillance system

Latin, Cyrillic and service characters

RTSP Server

A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive.

Number of characters—from characters—from 1 to 60

3

Disable

Set the checkbox

Sets Specifies the state (enabled or disabled) of the RTSP Server object in the digital video surveillance system

Boolean type

Clear

Set—the RTSP Server object is disabled and isn't used

Clear—the RTSP Server object is enabled and used

4

Computer

Select the value from the list

Sets Specifies the Computer parent object to which the given RTSP Server object belongs

Names of the Computer objects registered in the system

Name of the Computer parent object

Depends on the number of Servers servers in the digital video surveillance system with the distributed architecture

5

The Cameras table

Added

Set the checkbox

Specifies the cameras, the video signals from which should must be transmitted to remote workstations

Boolean type

Set—the video stream can be viewed at a remote workstation

Clear—the video stream cannot be viewed at a remote workstation

Number

Automatically

Displays the identification number of the Camera object in the system

Identification number of the Camera object registered in the system

Depends on the number of the Camera object registered in the system

Name

Automatically

Specifies the name of the Camera object in the video surveillance system

Name of the Camera object registered in the system

Depends on the number of the Camera object registered in the system

Gate

Select the value from the list

Specifies the Videogate through which video is received from the camera

Names of the Videogate objects registered in the system

-NA

Depends on the number of the Videogate objects registered in the system

Port

Enter the value into the field

Specifies the port through which the video signal is transmitted

Note. This column is available only if you set the Multicast checkbox.

Specified ports are not addressed directly. Use RTSP port to get video from all cameras in the Multicast mode

Natural number series

NA

Any available unused port numbers.

The number of ports is determined by the system administrator

Set—the video is transmitted in the "unicast" modeClear—

the Clear—the video isn't transmitted in the "unicast" mode

97

RTSP port

Enter the value into the field

Sets Specifies the port via through which the video signal will be is transmitted

Sequence of numbersNatural number series

554

Any available unused port numbers.

The number of ports is specified by the system administrator10

HTTP port

Enter the value into the field

Sets Specifies the port which should that must be used for transmitting the video signal via the http through HTTP protocol

Sequence of numbersNatural number series

8081

Any available unused port numbers.

The number of ports is specified by the system administrator11

Multicast

Set the checkbox

Enables the video transmission via through different RTSP ports.

The Multicast mode allows reducing the Server server load by reducing the amount of the transmitted data

Boolean type

Set—the video is transmitted in the "multicast" modeClear—

the Clear—the video isn't transmitted in the "multicast" mode

1210

Receiver IP address

Enter the value into the field

Sets Specifies the IP address from which the video will be is transmitted in the Multicast mode

IP address

224.0.1.150

From 224.0.0.0 to 239.255.255.255

Enter the value into the field

Sets Specifies the port number via through which the video signal will be is transmitted in the Multicast mode. When requesting the video data from the camera using the RTSP protocol, it is necessary to specify this port. The system forwards the request to the port of the requested cameraSequence of numbers

Natural number series

555

Any available unused port numbers.

The number of ports is specified by the system administrator

№

Parameter

Method for setting the parameter value

Parameter description

Symbols usedRepresentation

Default value

Value range

Set—the current time is sent to VLC Media Player

Clear—the frame time is sent to VLC Media Player

Set—the ECHD compatibility mode is enabled

Clear—the ECHD compatibility mode is disabled

Set—if Set—if there are captions on the video image, they are sent to the the receiving app

Clear—the video captions are not sent through the RTSP Server

Set—when requesting video via RTSP, the RTSP Serverdelay is minimum (~1 sec)

Clear—when requesting video via RTSP, the delay is ~1-5 sec

The list of the available network interfaces of the computer.

ANY—the ANY—the default network interface is used