Setting up the frame sign parameters

If the frame sign recording to the LP numbers database is activated, digital sign will be automatically assigned to every recorded LP number.
There is a possibility to change digital sign parameters.
Note. This setting is relevant only if the Uragan program module and VIT module are used.
To set up the parameters of digital frame sign do the following:

In the System Settings dialog window, open the Hardware tab (Fig. 7.2—11, 1).
Select the LPR channel, corresponding to the activated Auto-Uragan 3.5.0.29 module, in the objects tree on the Hardware tab (see. «Program module activation, used for Plates identification»).The settings panel of the selected object will open on the right side of the window Fig. 7.2—11, 2).

Fig. 7.2—11 Access to frame sign parameters

Click Settings button (Fig. 7.2—11, 3).
Frame sign parameters dialog window will be displayed in result.
Add one or several camera installation and speed detector parameters together with LPR channel to a frame sign. Put a tick in the Enabled checkboxes for necessary parameters in the Speed detector installation group and then enter in the field or select the values of corresponding parameters from the list (Fig. 7.2—12,Table 7.2—1).

Fig. 7.2—12 Adding the camera's installation and speed detector parameters to the frame sign
Table 7.2—1 Camera's installation and speed detector parameters

№	Parameter	Parameter description
1	Installation height of speed detector	Speed detector installation height in meters.
2	Shooting angle	Angle, made by an camera's objective optical axis and camera's vertical support, in degrees.
3	Angle of setting	Projection to the horizontal plate of the angle, made by speed detector's normal line and vehicle direction trajectory, in degrees
4	Installation type	Installation type of speed detector
5	Lane number	Lane number, controlled by speed detector
6	GPS Coordinates	GPS coordinates of speed detector

Add one or several speed detector parameters to the frame sign. Put a tick in the Enabled checkboxes for necessary parameters in the Information about speed detector group and then enter in the field or select the values of corresponding parameters from the list (Fig. 7.2—13,Table 7.2—2).

Fig. 7.2—13 Adding the information about speed detector
Table 7.2—2 Speed detector parameters

№	Parameter	Parameter description
1	Vehicle's serial number	Vehicle's serial number of speed detector
2	Vehicle's name	Speed detector's name
3	Manufacturer identifier	Speed detector's manufacturer identifier
4	Inspection expiring	Date in format «YYYY.MM.DD»,till which speed detector's metrological check is valid
5	Number of inspection certificate	Number of inspection certificate about the last speed detector's metrological check
6	Authority, who has performed the inspection	Authority, who has performed the last speed detector's metrological check
7	Inspection date	Date in format «YYYY.MM.DD» of the last speed detector's metrological check

Add one or several speed detector parameters to the frame sign. Put a tick in the Enabled checkboxes for necessary parameters in the Information about speed detector site and then enter in the field or select the values of corresponding parameters from the list (Fig. 7.2—14,Table 7.2—3).

Fig. 7.2—14 Adding information about speed detector site
Table 7.2—3 Speed detector site parameters

№	Parameter	Parameter description
1	System code-name	Photo-video fixation system code-name which contains functioning speed detector
2	Unique complex identifier	Unique complex identifier
3	Complex name	Complex name
4	Complex site(short)	Short description of complex site
5	Speed detector number in the complex	Speed detector number in the complex (channel number)
6	Speed detector site in the complex	Description of speed detector site in the complex
7	Installation region	Region where speed detector is installed
8	Settlement	Settlement where speed detector is installed
9	Street	Street where speed detector is installed
10	House	House near which speed detector is installed
11	Vehicle's direction at the complex site	Vehicle's direction at the complex site
12	ОКАТО code	Speed detector site code in All-Russian classifier of administrative territorial division
13	Additional information	Additional information about speed detector
14	Controlled direction	Vehicle's direction in respect of speed detector that controls it
15	Critical speed level	Vehicle's speed that is considered to be critical( for example, alarm is being generated in the process)
16	Speed restriction at the site	Allowed vehicle' speed at the road side , controlled by the speed detector

Click OK to save the changes and close Frame sign parameters window (Fig. 7.2—15).

Note. Click « » button to close the window without applied changes (Fig. 7.2—15).
Fig. 7.2—15 Saving the changes in the dialog window Frame sign parameters
Setting up the digital frame sign is completed.

Page tree

Documentation for Auto Intellect 5.0. Documentation for other versions of Intellect is [available too].