Documentation for Auto Intellect 5.0. Documentation for other versions of Intellect is [available too].

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Setting up the Events monitor component position is done in the following way:

  1. Go to the «Vehicle tracer» settings panel (Fig. 7.9—4).


Fig. 7.9—4 Setting up the Events monitor component position

  1. Go to the «Monitor» tab (Fig. 7.9—4, 1).
  2. To display the Events monitor component set the «Show» checkbox (Fig. 7.9—4, 2). Settings of the Events monitor component position will be activated in result.
  3. Set the coordinates and sizes of the Events monitor in a similar way as with the component Active monitor (Fig. 7.9—4, 3, steps 3-5 in the section « Setting up the Active monitor component position Setting up the Active monitor component position).

Note. Restrictions to the width and height of the Events monitor component do not interlace.

  1. Click «Apply» to save the applied changes (Fig. 7.9—4, 4).

Setting up the Events monitor component position is completed.

  • No labels