Configuring audio on the Client

To broadcast audio  from the Client microphone on a camera speaker, you must configure audio on the Client.

Do the following:

1. Go to Settings -> Options -> Audio parameters (1–2).
   

2. In the Audio source field, select the system device that will be used as the audio source for playback on the camera speaker (3).

   Note

   The default device is shown in the list in bold.

3. Set the microphone volume using the Audio sensitivity slider (4). The far left position of the slider represents the minimum volume, and the far right position represents the maximum volume.
4. Click the Apply button.

Configuration of audio on the Client is now complete.