Configuring Linux Server for INTELLECT™ operation

This stage includes the following:

1. Run INTELLECT™. To run the system in the Windows mainmenu click Start → All Programs → Intellect → Intellect.
2. Create a new Computer object in the Hardware tab and specify the NetBIOS name (see Network identification of Linux Server (LinuxHub) section) into the Computer name field.
   
3. Specify the IP addresses of your computer and LS in the Architecture tab then restart INTELLECT™.
   

   Specifying a LS IP address:
   

   Specifying a computer IP address:

   

4. In the Hardware tab click Reconnect in the contextual menu of the created computer object. If the settings are correct, the created computer is displayed in the hardware list.
   

Set other settings in INTELLECT™. For example, to display video received from a camera connected to LS, create a Video Capture Device object under the Computer <NetBIOS name> object in the tree, set the object type in accordance with the type of video capture card on which LS is created. Create the Camera object under the Video Capture Device object and set all required settings for the created video camera.

Creating a Camera object:

Example of LS configuration:

The Relay and Sensor objects are created under the Video Capture Device object with the first PCI channel used by the card. For example, when building security video subsystem with the use of two SC300Q16 (FX4) video capture cards and two Sensor-Relay cards (low profile), the Relay and Sensor objects are to be created under the Video Capture Device object with 00 (1^st SC300Q16 (FX4) video capture card) and 04 (2^nd SC300Q16 (FX4) video capture card) values of the PCI channel.

Configuring the Audio card object take into account that the list of available digitization rate can not agree with the one stated in the specification. This list depends on ALSA driver for LS.