Configuring Galaxy Dimension security zones

Security zones of the Galaxy Dimension control panel are configured in the settings panel of the Security zone object. This object is created from the Galaxy Dimension object on the Hardware tab of the System settings dialog box.

Galaxy Dimension security zones are configured as follows:

1. Go to the settings panel of the Security zone object
   

2. In the Address field, enter the address displayed for the specific security zone into the operator’s menu of the Galaxy Dimension control panel (1)

   NOTE.

    For more information on security zone addressing, refer to the official documentation of the Galaxy Dimension control panel.
3. Select the type of security zone from the Zone type drop-down list (2). The selected zone type will be displayed in the Event log window when an alarm event is registered in the given zone.
4. To save changes, click Apply (3)
5. Repeat steps 1-4 for all security zones.

Configuration of Galaxy Dimension security zones is now complete.