Documentation for Auto Intellect 5.2. Documentation for other versions of Intellect is available too.

Previous page Next page

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Attention!

Install additional software from the web-site for correct recognition of the carriages license plates.

Setting up the IntLab-Carriage program module is done in the following way:

  1. Go to the Hardware tab in the System settings dialog window (1).
    In the objects tree on the Hardware tab select the IntLab-Carriage module object, corresponding to the set IntLab-Carriage program module (2). The settings panel of the selected object will open on the right side of the window.
  2. From the Sensor: drop-down list select the Sensor object by event from which the plate recognition will perform (3).

  3. From the Working mode: drop-down list select the corresponding mode of license plate recognition (4).

    Note.

    The Recognizer of railway passenger carriage numbers in difficult conditions working mode differs by better recognition quality of "difficult" ((dirty, cut, substandard, etc.) numbers.

  4. To save changes click Apply (5).
  • No labels