Documentation for Axxonsoft Platform Calculator. Documentation for other products available here.

Previous page Next page


You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Cameras used in the video surveillance system are selected in the Parameters group of the Platform calculator page. To add cameras to the list click the Add button.

Note.

To remove configuration click the - button in Green stream column. To remove all configurations click the Clear cameras button.

The Platform calculator allows using of different streams to display video, send it to remote clients and record to archive. On default one stream is set for these purposes while adding cameras. To add additional streams click the + button in Green stream column. Additional stream is highlighted in blue in the table.

Note.

To remove stream click the - button in Green stream column.

The parameters are described in the table.

Parameter

Info

Cams

The number of cameras that is to be used in the video surveillance system.

Camera brandThe list of vendors of IP cameras and video capture cards integrated with Axxon Next and Axxon Intellect Enterprise.

Activity

Approximate estimation of activity in the field of view of a camera: low, middle or high.

ResolutionVideo resolution. The list of available resolutions depends on the selected vendor or the model of video capture card.

Codec

Compressor used by camera or video capture card for compressing video stream. The availability of compressors in the list depends on the selected vendor or the model of video capture card.

FPS

Frame rate of the stream. The range of values depends on the selected vendor or the model of video capture card.

Bitrate

The stream from one specified camera in Mbit/s. By default stream calculation is based on the average data received as a result of tests performed by ITV | AxxonSoft’s QA department. If the calculated stream is not accurate, then it is possible to set CBR per camera.

The Vendor’s calculator is used for more accurate calculation. The list of known calculators can be found in the Vendor’s calculator dropdown list. Many cameras allow setting CBR. 

Stream typesSelection type of stream.
DetectorSee Selecting types of detection tools and Extra detection tools with theoretical load.

Note.

If several streams are added for cameras then the Codec, Resolution, FPS and Bitrate parameters are specified for each stream separately.
  • No labels