Configure system without AAN central controller

To configure the system without central controller, do the following:

1. Create the Driver of minor line object and speciify parameters of the AIM modules connection (see the Configure connection of AAN controller section).
2. Create the Apollo AIM SC object on the basis of the Driver of minor line object and configure the AIM interface module (see the Configure AAN controller and Configure the AIM interface module sections).
3. Create the Apollo AIM SC Reader objects and objects of virtual inputs and relay (see the Configure AIM readers section).

Configuring of all devices in this method is equal to configuring devices in system with central controller apart from the following points:

1. Disabling of readers is available. To do this, delect the Activate checkbox and click the Apply button. 
2. Virtual inputs can be masked permanently and by time zone.Virtual input can't be in alarm state while masking.