Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.

Previous page Connecting relays of 4/4 Sensor-Relay expansion cards (low profile)  Configuring SL USBIO cards Next page


Depending on what video capture card is in use, the Sensor objects corresponding to sensors connected to 4/4 Sensor-Relay card (low profile) are created under the Video Capture Device objects of one of the following types: SC200Q4 Low profile (FS 115), SC300Q16 (FX 4), SC300D16 (FX 8), SC310N16 (FX 16), SC3B0N16 (WS 216), SC230N4 and SC590N4.

At least one Camera object is to be created under the same Video Capture device object for sensor to work.

The Sensor objects are to be created under the Video Capture Device object that has the first PCI channel. E.g., building security video subsystem with the use of two SC300Q16 (FX4) and two Sensor-Relay cards (low profile) the Sensor objects are to be created under the Video Capture Device objects  with 00 (for the first SC300Q16 (FX4) card) and 04 (for the second SC300Q16 (FX4) card) values of PCI channels.

If the Sensor-Relay card (low profile) is installed on SC3B0N16 (WS216) video capture card, then the Sensor objects are to be created under the Video Capture Device object with 00 value of the PCI-channel.

For SC310N16 (FX16) video capture card the Sensor objects can be created under the Video Capture Device object with 00 or 08 value of PCI channel. Working channel is discovered experimentally.

For SC230N4 video capture card the Sensor objects are to be created under the Video Capture Device object with 03 value of the PCI channel.

For the SC590N4 card the Sensor objects can be created under the Video Capture Device with number of PCI-channel that equals 00 (see Connecting 4/4 Sensor-Relay (low profile) cards section for Sensor-Relay card connected to low contacts of J2 connector of CS590N4 card) and 02 (for DI/DO card connected to top contacts of J2 connector of SC590N4 card). If the SC590N4 card is in use, do not create more than 4 Sensors objects for one Video Capture Device.

 

 

 

 

 

Note

Number of PCI channels (number of the Video Capture Device objects) for all types of cards is given in Features of video subsystem configuration section.

 One can create up to 4 Sensor objects under the Video Capture Device object. When configuring the Sensor objects one is to specify the channel numbers of sensor connection to 4/4 Sensor-Relay card (low profile). 4/4 Sensor-Relay card (low profile) allows connecting up to 4 sensor channels according to the license key file.

To change the channel numeration, use the Channel Number list on the settings panel of the Sensor object.

Channels are numbered according to external pinout of the card. The figure below shows an example of the channel numeration configuration of 4 sensors connected to one 4/4 Sensor-Relay card (low profile).

Channels of the second 4/4 Sensor-Relay card (low profile) are numbered 1-4.