Selecting the emitter-country of vehicles' LP numbers that are to be identified

The countries recognition functional is realized in the Auto-Intellect software only for Auto-Uragan, CARMEN-Auto, VIT and CARMEN-parking modules.  

The list of supported countries for a recognition module is given in it's functionality description in the General description of the Auto-Intellect software section.

While setting the LPR channel with Auto-Uragan/CARMEN-Auto/VIT/CARMEN-parking active module it is necessary to state a specific country to be able to identify the plates belonging to that country. This setting specifies the format of the license plates to be used in the recognition process.

 To select the country, do the following:

1. In the System Settings dialog window, open the Hardware tab.
2. In the object tree on the left side of the Hardware tab, select the LPR channel object representing the recognition module. The settings panel of the selected object will open on the right side of the window (see Activating the program module, used for identifying the plates section).
   

3. Select the country in the Country drop-down list (3).

   Note.

   It is possible to change the list of plate patterns which are to be recognized by the Auto-URAGAN or VIT module at country selecting after the update of Auto-Intellect hardware protection key firmware (see PatCgfr.exe utility for active patterns configuration or PresetEditor.exe utility for active patterns configuration of VIT module section correspondingly).

4. Click Apply (4).

The selection of emitter-state is completed.