Scanning fingerprints using the Access Manager module and Suprema readers

Scanning fingerprints using the Access Manager module and Suprema readers is performed in the following way:

1. Right-click the user's photo in the Access Manager window and select Extensions.
   
2. Select Suprema Host Controller or Suprema Slave Controller to use the reader connected to the corresponding controller (for information on configuring the readers see Configure the interaction between the Suprema Biometrical ACS and the Access Manager module).
   In both cases, the Suprema scanner window will open.
   
3. Click Add (1) to start scanning.
4. Put finger on reader and hold for a while, then repeat with the same finger. 

5. The scanned fingerprint will appear in the scanner window. You may click Remove/Remove all (2, 3) to remove the scanned data.
   

   Note

   You can take several attempts to scan the fingerprint, but only the first two fingerprints in the list will be written to controller.

6. Click OK (4).
7. Click Save (5) in the user editor to add the fingerprint to the user account. 
   

Scanning fingerprints using the Access Manager module and the Suprema reader is complete.