The Settings panel of the Computer object

The settings panel of the Computer object is shown in the figures.

The table describes the parameters of the Computer object settings.

№	Parameter	Method for setting the parameter value	Parameter description	Symbols used	Default value	Value range
1	Network name*	Automatically	Displays the computer name in the local network	Latin and service characters	-	Depends on the number of Computer objects registered in the system Number of symbols – from 1 to 15.
2	Name*	Enter the value in the field	Set the name of the Computer object in the system	Latin, Cyrillic and service characters	Computer	A line containing a sequence of any symbols (letters, digits, service characters apart from > and < symbols), not case-sensitive Number of symbols – from 1 to 60.
3	Disable	Is identified by the check mark	Defines the condition of the Computer object (enabled or disabled) in the system	Boolean type	Not available	Yes – the Computer is disabled and is not in use No – the Computer is enabled and is in use.
Disks for Archive Storage
4	Video	Is identified by the check mark	Set the disk for storing video archive from cameras and also audio archive during synchronous audio and video recording	Boolean type	No	Yes – the disk is used for video archive storingt No- the disk is not used for video archive storingt
5	Audio	Is identified by the check mark	Set the disk for storing audio archive from microphones	Boolean type	No.	Yes – the disk is used for video archive storingt No- the disk is not used for video archive storingt
6	Disk	Automatically, specify the value in the field	Displays the names of local disks, accessible for storing video and audio archive, and also used to specify the network disks used for archive storing.	Names of local disks (Latin characters), names of network disks (UNC-pathes)	-	Depends on the total number of local and network disks
7	GB	Automatically	Contains information about free space on the every accessible disk	Disk space in GB	-	Depends on the total free disk space
8	Recording	Automatically, set the checkbox checked	Show and set current disk for storing archive	Boolean type	No	Yes – the archive is currently stored on the specified disk. No – the archive is not currently stored on the specified disk.
Settings Group
9	Connection	Enter the value in the field	Gives the name to the modem connection used in the Windows OS.	Latin, Cyrillic and service characters	Not defined	A line containing a sequence of any symbols (letters, digits, service characters) Number of symbols – from 1 to 30.
10	Username	Enter the value in the field	Sets the login name for the existing Windows modem connection.	Latin, Cyrillic and service characters	Not defined	A line containing a sequence of any symbols (letters, digits, service characters), case-sensitive. Number of symbols – from 1 to 30.
11	Password	Enter the value in the field	Sets the password for the existing Windows modem connection	Latin, Cyrillic and service characters	Not defined	A line containing a sequence of any symbols (letters, digits, service characters), case-sensitive. Number of symbols – from 1 to 30.
12	Disable record-keeping	Is identified by the check mark	Switches off storing of events to the Event viewer database on the local computer.	Boolean type	No	Yes - events are not stored to the Event viewer database No - events are stored to the Event viewer database
13	Only local protocols	Is identified by the check mark	Activates logging to the database the Events viewer only information about events, registered on the given computer	Boolean type	Not available	Yes – only events, registered at this computer are logged to the database the Events viewer No – events, registered at this computer are not logged to the database the Events viewer
14	Time synchronization	Checkbox	Set time synchronization of all computers in the distributed system with system time of this computer. Time is automatically synchronized at midnightevery 24 hours or when INTELLECT™ is started on the Server that is the source of time synchronization.	Boolean type	No	Yes – time is synchronized No – time is not synchronized
15	Events archive length	Type-in the value in the field	Sets the peiod of time for the events to be stored in the Event viewer database	Days	-	More than 1
16	Run x64 modules checkbox	Setting checkbox	Specifies the way of launch of 64-bits modules	Boolean type	Up to 4.10.2 – No From 4.10.3 – Yes	Yes - 64-bits module launches when the module launch attempt. If such variant is not found the 32-bits module launches. No - 64-bits modules are not launch
17	Use as client checkbox	Checkbox	Computer is used as the Client in the distributed video surveillance system	Boolean type	No	Yes – computer is used as Client. No – computer is used as Server or RAW.
18	Initial display	Is selected from the list	Set the screen to be displayed on default after starting of the Intellect digital video surveillance system. The last active Display is displayed after the Intellect restart if no one screen is selected.	Names of the Display objects registered in the system	-	Depends on total number of Display objects registered in the system.
19	Default user	Is selected from the list	Defines a default user, i.e., the user, the rights and authorities of which will be used to launch Intellect™ software without a password.	Names of the users registered in the system.	Not defined	List of users registered in the Intellect™ system.
20	Camera discovery tool	Press the button	Access to creating, settings and editing of IP devices.	-	-	-
21	Operator speaker	Is selected from the list	Allows swlwcting the speaker that is to be in use for audio playback	Names of the Speaker objects registered in the system	Not defined	Depends on number of the Speaker objects registered in the system
Protocol synchronisation
22	Synchronize	Is identified by the check mark	Set the syncronisation of database The Events viewer of local and remote computers	Boolean type	-	Yes– database the Events viewer of local and remote computers are synchronised No– database the Events viewer of local and remote computers are not synchronised
23	Computer	Automatically	Displays the netname of remote computer with which database the Events viewer must be synchronised	Latin alphabet and service characters	-	Depends on the number of computers, registered in the system
24	Name	Automatically	Displays the name of remote computer in the net	Latin, Cyrillic and service characters		A line containing a sequence of any symbols (letters, digits, service characters), case-sensitive. Number of symbols – from 1 to 60.
25	Change connection string	Press the button	Access to settings and editing the parameters of coonection to the database the Events viewer of remote computer	-	-	-

Page tree

Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.