The Settings panel of the Detection zone object

1

Identification number*

Automatically

Displays the identification number of the Detection zone object in the digital distributed video surveillance system.

Sequence of numbers

-

Depends on the number of Detection zone objects in the digital distributed video surveillance system.

2

Name*

Enter the value in the field

Defines the name of the Detection zone object in the digital distributed video surveillance system.

Latin, Cyrillic letters and service characters

Detection zone

A line containing a sequence of any symbols (letters, digits, service characters apart from > and < symbols), not case-sensitive.

Number of symbols – from 1 to 60.

3

Disable

Is identified by the check mark

Defines the condition of the Detection zone object (enabled or disabled) in the digital distributed video surveillance system.

Boolean type

Not available

Yes – the Detection zone is disabled and is not in use

No – the Detection zone object is enabled and is in use.

4

Camera

Is selected from the list

Defines the parent Camera object of the digital distributed video surveillance system, to which the given Detection zone object refers.

Name of the Camera objects registered in the system

Name of the parent Camera object.

Depends on the number of Camera objects in the digital distributed video surveillance system.

5

Alarmed

Is identified by the check mark

Starts automated recording of the video signal from the camera with the alarm received from the selected detector.

Boolean type

Not available

Yes – automated recording of the video signal with the alarm received from the selected detector is in progress.

No – automated recording of the video signal with the alarm received from the selected detector is not in progress.

6

Always armed

Is identified by the check mark.

Defines the condition of the selected detector as Always armed.

Boolean type

Not available

Yes – the detector should always be armed.

No – the operator may disarm the detector.

Direction Group

7

Direction of search*

Press the arrow buttons.

Defines the direction of search for the motion detector.

8 possible directions to follow an object within the frame.

Pressed: up, down, to the left, to the right

Pulled out: up and to the left, up and to the right, down and to the left, down and to the right.

Up, down, to the left, to the right, up and to the left, up and to the right, down and to the left, down and to the right.

Out of the groups

8

Detector

Is selected from the list

Is used to define the type of the detector in use.

List of the detectors in the system.

Motions

Motion

Focus

Stability

Background change

Blind

Cover

Abandoned objects

Infrared

9

Show

Is identified by the check mark

Defines the frame border in the observed scene.

This parameter is active only with the following detectors selected from the Detector list: motion, abandoned objects, infrared.

Boolean type

Yes.

Yes – the object border is displayed in the observed scene.

No – the object border is not displayed in the observed scene.

10

Sensitivity

Set the slide in the required position.

Defines the cognominal parameter of the selected detector settings. Depends on the type of detector selected.

-

Average

-

11

Contrast

Set the slide in the required position.

Defines the cognominal parameter of the selected detector settings. Depends on the type of detector selected.

Is not applicable for all detector types.

-

Average

-

12

Filtration

Set the slide in the required position.

Defines the cognominal parameter of the selected detector settings. Depends on the type of detector selected.

Is not applicable for all detector types.

-

Minimal

-

13

Size

Set the slide in the required position.

Defines the cognominal parameter of the selected detector settings. Depends on the type of detector selected.

Is not applicable for all detector types.

-

Average

-

14

Set delimitation lines

Is not used

-

-

-

-