The Settings panel of the Event viewer object

The Event viewer object represents an interface box showing text information about the events initiated by the distributed surveillance system.

The settings panel of the Event viewer object is shown in the figures.

The Main tab

The Filters tab

The table describes the parameters of the settings corresponding to the elements of the settings panel of the Event viewer object.

№	Parameter	Method for setting the parameter	Parameter description	Symbols used	Default value	Value range
1	Identification number*	Automatically	Displays the identification number of the Event viewer object in the digital distributed video surveillance system.	Sequence of numbers	-	From 1 and above. Depends on the number of Event Viewer objects in the digital distributed video surveillance system.
2	Name*	Type-in the value in the field	Sets the name of the Event viewer object in the digital distributed video surveillance system.	Latin, Cyrillic and service characters	Event Viewer	A line containing a sequence of any symbols (letters, digits, service characters apart from > and < symbols), not case-sensitive Number of symbols – from 1 to 60.
3	Disable	Checkbox	Sets the status of the Event viewer object (enabled or disabled) in the digital distributed video surveillance system.	Boolean type	No	Yes – the Event viewer is disabled and is not in use. No – the Event viewer is enabled and is in use.
4	Screen	Select in the list	Specifies the parent Display object of the digital distributed video surveillance system, to which the given Event viewer object refers.	Names of Display object s registered in the system	Name of the parent Display object .	Depends on the number of Display object s in the digital distributed video surveillance system.
The Settings group
5	X	Type-in the value in the field	Sets the coordinate in the X horizontal axis for the upper left corner of the window of the Event viewer interface object on the screen.	% of the screen width	Not set	From 0 to M*100, where M is the number of monitors installed.
5	Y	Type-in the value in the field	Sets the coordinate in the Y vertical axis for the upper left corner of the window of the Event viewer interface object on the screen.	% of the screen height	Not set	From 0 to M*100, where M is the number of monitors installed.
6	W	Type-in the value in the field	Sets the window width of the Event viewer interface object.	% of the screen width	Not set	From 0 to M*100, where M is the number of monitors installed.
6	H	Type-in the value in the field	Sets the window height of the Event viewer interface object.	% of the screen width	Not set	From 0 to M*100, where M is the number of monitors installed.
7	Monitor	Is selected in the list	The number of monitor in OS for which coordinates are specifying	Numbers of monitors	1	1-16
8	Allow moving	Checkbox	Allows the operator changing the position of the Event Viewer by clicking on it.	Boolean type	No	Yes – Operator can change the position of Event viewer. No – Operator cannot change the position of Event viewer.
9	Display video	Checkbox	Allows Operator viewing archive footage of the events, initiated by the Event Viewer as Record to disk using the Event viewer box.	Boolean type	No	Yes – Operator is allowed viewing the archive footage using the Event Viewer window. No – Operator is not allowed viewing the archive footage using the Event viewer window.
10	Display object on map	Checkbox	Allows Operator viewing objects, displayed in the Event viewer window, on the map.	Boolean type	No	Yes - Operator is allowed viewing the objects, displayed in the Event Viewer window, on the map. No - Operator is not allowed viewing the objects, displayed in the Event Viewer window, on the map.
11	Display report	Checkbox	Allows Operator creating a printed form of the report and printing out the information about all events registered by the Event viewer within the pre-set period of time.	Boolean type	No	Yes - Operator is allowed creating a printed form of the report and printing out the information about all events registered by the Event Viewer within the pre-set period of time. No - Operator is not allowed creating a printed form of the report and printing out the information about all events registered by the Event Viewer within the pre-set period of time.
12	Load protocol	Checkbox	Defines, whether or not the latest 1000 events registered by the Event viewer with the latest system start, should be downloaded with the launch of Intellect™ software.	Boolean type	No	Yes - the latest 1000 events registered by the Event viewer with the latest system start, should be downloaded with the launch of Intellect™ software. No - the latest 1000 events registered by the Event viewer with the latest system start, should not be downloaded with the launch of Intellect™ software.
The Advanced settings group
15	View days	Type-in the value in the field	Specifies the period over which events are to be displayed in the Event Viewer, if there are more than 10,000 events. If there are less events, then all events are displayed regardless of the value of this parameter.	Days	1	More than 1
16	View events	Select in the list	Sets the events for displaying in the window of the Event Viewer.	-	All events	All events – all events are displayed in the Event Viewer window Last event – one last event is displayed in the Event Viewer window All last events – all last events are displayed for all selected objects
17	Background color	Select in the list or on the Select color panel.	Sets the background color in the Event Viewer box	RGB, CMY or HSL.	White	Corresponds to the standard range of the selected color system.
18	Text color	Select in the list or on the Select color panel.	Sets the text color in the Event Viewer box	RGB, CMY or HSL.	Black	Corresponds to the standard range of the selected color system.
19	Color of alarm messages	Select in the list or on the Select color panel.	Sets the color of the alarm messages in the Event viewer window.	RGB, CMY or HSL.	Red	Corresponds to the standard range of the selected color system.
20	Color of info messages	Select in the list or on the Select color panel.	Sets the color of the information messages in the Event viewer window.	RGB, CMY or HSL.	Blue	Corresponds to the standard range of the selected color system.
21	Duration of blinking, sec:	Type-in the value in the field	Sets the duration of alarm message blinking in the Event viewer window.	seconds	Not set	More than 0
22	Font:<current font>	Click the button	Sets the font of information messages in the Event viewer window	Standard Font Windows dialog box	Depends on OS settings	-
The Filters tab
23	Specify general background color	Click the button	Opens the window to select the message background color in the default filter	-	-	-
24	Specify general text color	Click the button	Opens the window to select the message text color in the default filter	-	-	-
25	Name	Specify the value in the field	Sets the filter name in the Event Viewer	Latin and Cyrillic alphabet, service digits	Filter 1, Filter 2, etc.	Depends on the number of created filters.
26	Type	Select in the list	Sets the types of objects to be displayed in the Event viewer. NOTE. If the field is empty, the Event viewer displays all events for all objects in the system.	Types of objects registered in the system.	Not set	Depends on the number of types of objects created in the digital distributed video surveillance system.
27	Number	Select in the list	Sets the identification number of the device. NOTE. If the field is empty, the Event viewer displays all events for all objects of the selected type.	Sequence of numbers	Not set	Depends on the number of created objects of the selected type in the digital distributed video surveillance system.
28	Name	Automatically	Specifes the name of the device selected in item 14.	Name of the objects of the selected type registered in the system	Name of specified system object	Depends on the number of objects of the selected type in the digital distributed video surveillance system.
29	Event	Select in the list	Specifies which event coming from selected devices is to be logged. NOTE. If the field is empty, the Event viewer displays all events coming from specified devices.	Names of event types for selected type of devices.	Not set	Depends on the type of object.
30	Region	Select in the list	Sets the region where the objects to log the events from are located.	Name of the region registered by the system.	Not set	Depends on the number of Region objects created in the digital distributed video surveillance system.
31	Color	Select in the list	Sets the messages highlight color in the Event Viewer	RGB, CMY or HSL.	White	Corresponds to the standard range of the selected color system.
32	Text color	Select in the list	Sets the messages text highlight color in the Event Viewer	RGB, CMY or HSL.	Black	Corresponds to the standard range of the selected color system.

*The name of the element is not displayed in the settings panel of the given object.

Page tree

Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.