Selecting the video cameras to work with the LPR channel

To set up the LPR channel, specify the main camera for LP number recognition, and an additional synchronous camera, if necessary.

The main recognition video camera is directed at the driving lane. The additional video camera covers the same area as the main video camera, but it can be mounted in another place. The two video cameras can be controlled synchronously using scripts or macros.

Example. Gas filling station. The main video camera is directed at the incoming lane and recognizes the LP numbers of approaching cars. The additional synchronous video camera is mounted at the side of the lane and monitors the fuelling process.

To select the video cameras, do the following:

1. In the System Settings dialog window, open the Hardware tab.
2. Select the LPR channel, corresponding to the activated Auto-Uragan, CARMEN-parking or CARMEN-Auto module, in the objects tree on the Hardware tab (see Activating the program module, used for identifying the plates section). The settings panel of the selected object will open on the right side of the window.
   
3. Select a Camera object in the License plates recognition field (main camera for LP number recognition) (3).

4. Select a Camera object in the Synchronous pickup field (additional synchronous camera) (4).

   Attention!

   Frames recording from the synchronous video camera is performed only if permanent record by both video cameras is performing.

5. Click the Apply button.

The camera selection is completed.