The Settings panel of the Long-term archive object

The settings panel of the Long-term archive object is shown in figure.

Table describes the parameters of the settings corresponding to the elements of the settings panel of the Long-term archive object.

№	Parameter	Method for setting the parameter value	Parameter description	Symbols used	Default value	Value range
1	The Identification number field	Automatically	Displays the identification number of the Long-term archive object in the system.	Sequence of numbers	-	Depends on the number of Long-term archive objects in the system.
2	The Name field	Type-in the value in the field	Sets the name of the Long-term archive object in the system.	Latin, Cyrillic and service characters	Long-term archive	A line containing a sequence of any symbols (letters, digits, service characters apart from > and < symbols), not case-sensitive. Number of symbols – from 1 to 60.
3	The Disable checkbox	Checkbox is set	Sets the state of the Long-term archive object (enabled or disabled) in the system.	Boolean type	Not available	Yes – the Long-term archive object is disabled and is not in use. No – the Long-term archive object is enabled and is in use.
4	The Computer dropdown list	Selected in the list	Sets the parent Computer object of the system for the given Long-term archive object	Name of the Computer objects registered in the system	Name of the parent Computer object	Depends on the number of Computer objects in the system
The Cameras group
5	The Range button	The button is pressed	Access to the complex selection of video cameras for copying of video archive to the Long-term archive	-	-	-
6	The All button	The button is pressed	Selection of all cameras registered in the system for copying of video archive to the Long-term archive	-	-	-
7	The Number dropdown list	Selected in the list	Sets the identification number of the surveillance camera for copying of video archive to the Long-term archive	Sequence of numbers	-	Depends on the number of cameras registered in the system
8	The Camera dropdown list	Is selected from the list	Sets the name of the camera for copying of video archive to the Long-term archive	Names of cameras registered in the system	-	Depends on the number of cameras registered in the system
9	The Gate dropdown list	Selected in the list	Sets the Videogate object through which video archive from the selected camera has to be transferred to the Long-term archive	Name of the Gate objects registered in the system	-	Depends on the number of Gate objects registered in the system
10	The Long-term archive dropdown list	Selected in the list	Sets the Long-term archive object which will supply the data to the given Long-term archive	Name of the Long-term archive objects registered in the system	-	Depends on the number of Long-term archive objects registered in the system
11	Compression drop-down list	Select value from the list	Specifies the level of video signal compression to record to Long-term archive	Numbers	-	As increasing the compression level 0, 1, 2, 3, 4, 5 0 – no compression 5 – maximum compression
12	Compressor drop-down list	Select value from the list	Specifies the procedure of video stream compression which is in use for video signal recompression at record to the Long-term archive. The value is to be selected in the Compression list if the compressor is specified.	List of available procedures	-	MJPEG, Motion Wavelet 3.5, Motion Wavelet 7.1
13	The External storage dropdown list	Select value from the list	Set the External storage object used for the archive import from the external storage on IP device	Names of External storage objects registered in the system	-	Depends on the number of the External storage objects registered in the system
The Record to drives group
14	The Video checkbox	Checkbox is set	Sets the drive to store the Long-term archive	Boolean type	No	Yes - the Long-term archive is stored to the drive No - the Long-term archive is not stored to the drive
15	The Disk column	Automatically	Displays names of local (network, USB) disks, available for storing the Long-term archive	Name of available disks (Latin characters)	-	Depends on the total number of available disks
16	The GB column	Automatically	Diaplays information about free space on the every available disk	Disk space in GB	-	Depends on free disk space
The Transfer rate group
17	The Computer column	Automatically	Sets the list of computers wrom which video is transferred to the Long-term archive	Names of competers in the hardware tree	-	Depends on the number of Computer objects in the system and list of cameras selected for transferring archive
18	The kBps column	Type-in the value in the field	Sets the maximum bandwith of transmitting video from the computer to the Long-term archive via the LAN.	Kbytes/sec	100	Depends on the bandwidth of the local network and resources used by the computer. 0 – bandwidth is not limited
The Settings group
19	The Scaling checkbox	Checkbox is set	Enables scaling of video archive for transmitting it to the Long-term archive	Boolean type	-	Yes – the scaling function is enabled. No – the scaling function is disabled.
19	The Scaling dropdown list	Selected in the list	Sets the frame rate of video archive while scaling	Frame/sec	-	1, 2, 3, 4, 6, 8, 12, 25
20	The Archiving period dropdown list	Selected in the list	Set the timetable of copying video archive to the Long-term archive	Name of Time zone objects registered in the system Never Always	Never	Never – there is no copying of video archive to the Long-term archive. Always – there is copying of video archive to the Long-term archive. Connection lost – the video archive is copied to the Long-term archive from the external storage when the connection is restored. Time zone – copying of video archive to the Long-term archive is performed according to the time zone.
21	The Failover service checkbox	Set the checkbox	Enables cooperation of the Long-term archive with the Failover service (see also Configuring archive synchronization of main and backup Servers).	Boolean type	No	Yes – the Long-term archive module is in use for synchronization of archive of the main and backup Servers in the Failover mode. No – the Long-term archive module operates as usual.

Page tree

Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.