Previous page Next page
Configure video parameters as follows:
Select the playback format (1): mjpeg; mjpeg via ffmpeg (less resource-intensive than mjpeg); rtsp via ffmpeg (h.264) (video is displayed in the original format via RTSP protocol).
Specify the RTSP port set in the Intellect settings (2, see Configuring rtsp Server module).
- Select the video aspect ratio (3): fit in window; window; fill in window; expand video.
- Live stream for shapshots (4): when the parameter is enabled live streams are displayed in the quad, when the parameter is disabled – frames at some update rate.
- Select the preferred live video stream (5): speed - stream of low quality is selected; quality - stream of high quality is selected.
- Select the resolution of live and archive video when displaying on the screen (6):
- Default 360p - display video with 480 x 360 constant resolution.
- QCIF 144p - display video with 176 × 144 constant resolution.
- 4CIF 576p - display video with 704 × 576 constant resolution.
Maximum 1080p - display video with 1920 x 1080 constant resolution.
Select the video resolution in the list of cameras when displaying on the screen:
- Default 180p - display video with 320 x 180 constant resolution.
- SQCIF 96p - display video with 128 × 96 constant resolution.
- QCIF 144p - display video with 176 × 144 constant resolution.
- CIF 288p - display video with 352 × 288 constant resolution.
- 4CIF 576p - display video with 704 × 576 constant resolution.
Maximum 1080p - display video with 1920 x 1080 constant resolution.
Note
These restrictions are recommended when your mobile device has a slow Internet connection.
- Activate the Dewarp (8) parameter for auto detection of fish-eye camera image format. It operates in mjpeg playback format (see 1).
Activate the Dewarp autoadjust (9) parameter for correction of non-standard image from fish-eye camera.
Video parameters are configured.