Configuting the Hikvision anti pass-back

You can configure Hikvision anti pass-back via the Hikvision reader's setup panel (see Configuring a Hikvision reader). As an example of the Hikvision anti pass-back configuration, let's consider a Hikvision reader connected to a Hikvision 26X controller.

To configure the Hikvision anti pass-back, do the following:

1. Go to the Hikvision reader setup panel.
   
   
2. In the Card reader pane (1), check the boxes for the readers where the anti pass-back monitoring is required.
3. Click the Apply (2) button to save your settings.

The Hikvision anti pass-back is now configured.