The Settings panel of the ONVIF-Server object

The ONVIF-Server object is designed to transmit Intellect video over ONVIF protocol.

The settings panel of the ONVIF-Server object is shown in the figure.

The Basic settings tab

The Event settings tab

Basic elements of the settings panel of the ONVIF-Server object are described in the table.

#	Parameter name	Method for setting the parameter value	Parameter description	Representation	Default value	Value range
1	ID	Automatically	Displays the identification number of the ONVIF-Server object in the digital video surveillance system with distributed architecture	Sequence of numbers	-	Depends on the number of the ONVIF-Server objects in the digital video surveillance system with distributed architecture
2	Name	Specify the value in the field	Sets the name of the ONVIF-Server object in the digital video surveillance system with distributed architecture	Latin, Cyrillic and service characters	PTZ device	A line containing a sequence of any symbols (letters, digits, service characters apart from > and < symbols), not case-sensitive. Number of symbols – from 1 to 60.
3	Disable	Set the checkbox checked	Sets the state (enabled or disabled) of the ONVIF-Server object in the digital video surveillance system with distributed architecture	Boolean type	No	Yes – the ONVIF-Server object is disabled and not in use. No – the ONVIF-Server object is enabled and in use.
4	Computer	Select in the list	Sets the parent Camera object to which the ONVIF-Server object corresponds in the digital video surveillance system with distributed architecture	The names of the Computer objects registered in the system	The name of the Computer parent object	Depends on the number of computers in the digital video surveillance system with distributed architecture
5	Port number	Specify the value in the field	Sets the port number used to connect to the Server	Integer greater than 0	-	1– 65 535
6	IP-interface	Select in the list	Sets the network interface (network adapter) used to connect to the Server	List of available network interfaces	-	The list of values depends on video adapters available in the system
7	RTSP Server	Select in the list	Sets the RTSP Server object the settings of which are applied by the ONVIF-Server object while transmitting video	The names of the RTSP Server objects registered in the system	-	Depends on the number of RTSP Server objects created in Intellect
8	Use Media2 service	Set the checkbox checked	Enabling Onvif 2.X standard instead of Onvif 1.X	Boolean type	No	Yes – transmitting video in H265 or H264 formats. No – transmitting video in MPEG, MJPEG or H264 formats.
9	Allow DHCP setting	Set the checkbox checked	Enabling DHCP support	Boolean type	No	Yes – DHCP is in use. No – DHCP is not in use.
10	Discovery mode	Set the checkbox checked	Enabling WS-Discovery mode	Boolean type	Yes	Yes – WS-Discovery mode is enabled. No – WS-Discovery mode is disabled.
11	Brand	Specify the value in the field	Sets the name of brand that will be displayed in third-party clients that support getting the stream over ONVIF	Latin, Cyrillic and service characters	ITV	A line containing a sequence of any symbols (letters, digits and service characters)
12	Model	Specify the value in the field	Sets the name of model that will be displayed in third-party clients that support getting the stream over ONVIF	Latin, Cyrillic and service characters	Intellect	A line containing a sequence of any symbols (letters, digits and service characters)
13	Department	Select in the list	Sets the department where the users will be created when they are added via the ONVIF-Server interface	The names of the Department objects registered in the system	-	Depends on the number of the departments registered in Intellect

Page tree

Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.