Direct Server connection

Configure the Web server in the appropriate software package before connecting to the Server (see Configuring the web server, Configuring the server for the clients connection via the Web-server 2.0 module). 

When you start the software for the first time you can connect to the Intellect and Axxon Next demo servers to see your Client's capabilities.

Add a new server as follows:

1. Click the  button.

2. Set Server connection parameters: 

   1. Enter the server name (1).
      

   2. Enter the URL server address in the format http://<Server IP address>:<Port>/<Prefix> (2).

      Note

      Example URLs with standard Server settings for Axxon Next and Intellect:
      

      Axxon Next (3.6 and earlier): 192.168.0.10:8000/asip-api

      Axxon Next 4: 192.168.0.10:80

      Axxon Intellect: 192.168.0.10:8085/web2

   3. Enter the user name and password for connecting (3-4).

      Note

      When connecting to Intellect Server the username and password of the user with rights of Windows authorization in Intellect can be in use (see Assigning the rights and password to operators for authorization in the Intellect) and the username is to be specified as follows:

      \\WorkPC\user where WorkPC is the computer or domain name and user is the username. Take into account the letter case when specifying the user and password.

3. To test the connection, tap the Test connection button (5). If the server is running, the connection settings are correct, and the device has a stable Internet connection, the message Connection successful appears. Otherwise, a message will remind you to verify these conditions.

   Note

   To perform a basic check of the web server connection and operability, in a browser on your mobile device, go to the Server's URL address (see step 2).

4. To save the server, tap the OK button (6).

The server is added to the list.

You can share the created server settings. For this click the  button and select a handy way.

Swipe and then use the  button to remove the Server or click the  button to go to the Server settings. 

To create a QR code with Server settings click the  button.

To create a Server with the same settings on another device click the  and scan the code.

The server that is now connected is marked .

To connect to another server, call the Client context menu by clicking the  button in the top left corner.

Select the required server as follows:

1. Click the corresponding Server icon.
   
2. Click  and select the required Server in the list.
   

To go back to the Server settings, click Manage.