Go to documentation repository
Previous page Next page
To get information from and write information to HID devices, go to the VertX / Edge ACS object's setup panel.
To get the configuration from all the devices, click the Get current configuration button (1).
To write the configuration to all the controllers, click the Write configuration to controllers buttons (2).
To write the ACS settings to all the controllers, click the Write VMS settings to controllers button (3).
Attention!
It is highly recommended to perform the regular database writing to avoid errors receiving from controllers in case of vendor constraints violations.
Note.
The following constraints are placed:
- It is possible to dynamically create only 10000 users if in the database there is less than 10000 users. Otherwise, it is possible to create only 100 users.
- To change the access type (card+pin, only card, only pin, card or pin) it is needed to update the database.
- It is impossible to delete user. As deletion emulation specify January, 1, 1990 as card validity end date. In such case the “Card date expired” message will display.
- It is impossible to change the card number.
Attention!
It is impossible to delete user and then create the new user with other card number. In such case the user id will be identical and record of other card number with the same user id is impossible.
To synchronize the Server's time with the time of all the controllers, click the Write current time button (4).
To get the configuration from selected controllers, click the Get configuration from...button (5), select the checkboxes of the required controllers (1), and click the Apply button (2).
To write the configuration to selected controllers, click Write configuration to... (6), select the checkboxes of the required controllers (1), and click the Apply button (2).
To write the ACS settings to selected controllers, click Write VMS settings to... (7), select the checkboxes of the required controllers (1), and click the Apply button (2).
To synchronize the Server's time with the time of selected controllers, click the Write current time to...button (8), select the checkboxes of the required controllers (1) and click the Apply button (2).
Overview
Content Tools