Configure the Intrepid II System controllers

Configuring the Intrepid II System controllers is performed on the settings panel of the corresponding object.

Controllers are created on the basis of the Intrepid II System object automatically while creating the object tree (see the Auto creating of Intrepid II System objects tree section). All controllers are configured similarly.

To configure the Intrepid II System controllers, do the following:

1. Go to the settings panel of the corresponding controller.
   
2. The value specified while auto creating the objects tree is set In the Address: drop-down list (1). It is possible to change this address. To change the controller address, do the following:
   1. Select the new value from the drop-down list.
   2. Click Apply button (3).
3. Information about the controller is specified in the MAC address and Installation name fields. Check the accuracy of controller address if these fields are empty (2).

Configuring of the Intrepid II System controllers is completed.