Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.

Previous page Creating and configuring the Sensor system object  Configuring Sensor-Relay expansion cards Next page


An analog sensor os represented in Intellect as Analog sensor object created under the Video Capture Device object. On the settings panel of the Video Capture Device object, set the Type, Model and Firmware of the IP-device or Sensor/Relay card to which the analog sensor is connected and set the connection parameters. Use the Camera discovery tool to create the corresponding objects without any additional configuration if the analog input is connected to a device integrated via Drivers Pack (see Drivers Pack Documentation).

The analog sensor is configured as follows:

  1. Go to the Analog sensor object settings panel.
  2. In the Channel number drop-down list, select the channel number matching the number of output connector to which the sensor is connected (1).
  3. Click Apply (2).

The analog sensor configuration is completed.

  • No labels