Configuring the SIP Panel interface object

The SIP Panel interface object is used to work with SIP-devices in Intellect. For details about configuring these devices, see Configuring SIP devices.

The SIP Panel is configured as follows:

1. Create a SIP Panel object based on the Display object on the Interfaces tab of the System Settings dialog box (1).
   
2. Set the coordinates of the upper left corner of the interface window in the X and Y fields (2).
3. Set the width and height of the interface window in the W and H fields (3).
4. From the Monitor drop-down list (4), select the computer monitor on which the interface window will be displayed.
5. If it is necessary to display the SIP Panel only during a call, set the Display only when calling checkbox (5).
6. From the Terminal drop-down list (6), select the SIP-terminal object which SIP-devices use the SIP Panel.
7. From the Monitor drop-down list (7), select the Monitor object corresponding to the Video Surveillance Monitor to which the video cameras associated with the corresponding SIP-devices are added. For details, see Selecting and configuring video cameras.
8. From the Camera drop-down list (8), select the operator's camera, the video image from which should be transmitted when calling from/to the Intellect SIP-terminal via the SIP Panel.
9. From the Microphone drop-down list (9), select the operator's microphone, the sound from which should be transmitted when calling from/to the Intellect SIP-terminal via the SIP Panel.
10. From the Speaker drop-down list (10), select the operator’s speaker to which the sound should be transmitted when calling from/to the Intellect SIP-terminal via the SIP Panel.
11. Click Apply (11).

The SIP Panel is configured.