Setting up the IntLab-Carriages module

Setting up the IntLab-Carriage program module is done in the following way:

1. Go to the Hardware tab in the System settings dialog window (1).
   In the objects tree on the Hardware tab select the IntLab-Carriage module object, corresponding to the set IntLab-Carriage program module (2). The settings panel of the selected object will open on the right side of the window.
   

   Note

   For more details on working with macros, see Creating and using macros.

2. From the Working mode drop-down list select the mode of recognition passenger or freight carriage numbers (5).

   Mode	Additional info
   Recognizer of railway passenger carriage numbers	-
   Recognizer of railway freight carriage numbers	-
   Recognizer of UIC railway carriage numbers	Allows recognition of UIC carriage numbers

3. From the Fluid level detection drop-down list select the Fluid level detection object to be used with the IntLab-Carriages module (6). Fluid level detection is a part of the Intellect Detector Pack subsystem starting from version 2.6. For details on how to create, configure and operate it, please refer to Detector Pack. User Guide (the most relevant version is available in AxxonSoft documentation repository).
4. Go to the parent LPR Channel object settings panel and in the Direction drop-down list select the carriages direction in the camera view:
   1. any: license plates are recognized for carriages moving in both directions;
   2. to the right: license plates are recognized for carriages moving to the right;
   3. to the left: license plates are recognized for carriages moving to the left.
5. Click Apply (7) to save changes.

If the use of the auxiliary recognition channels (IntLab-Carriages subordinate modules) is required, the auxiliary channels are to be configured (see Setting up the auxiliary recognition channel of the IntLab-Carriages module).

Setting up the IntLab-Carriage program module is completed.