Configuring Optex's сonnection to the Server

To configure Optex's connection, use the setup panel of the relevant Optex Sensor object. To find this object,  go to the Settings dialog box, click the Hardware tab, and browse the object tree of the relevant Computer object.

To configure Optex's connection to the Server:

1. Go to the setup panel of the relevant Optex Sensor object.
   

2. In the IP address field, enter the sensor's IP address (1).

   Note:

   This IP address can be found in the vendor documentation.

3. In the Ethernet port field, enter the sensor's communication port (2).

   Note:

   By default, 1234 is used.
4. In the Protocol type drop-down list, select the communication protocol to be used to talk to the sensor (TCP or UDP) (3).
5. Click Apply to save the changes (4).

Optex's connection tothe Server is now configured.