Configuring Hikvision user cards

To configure Hikvision user cards, do the following:

Go to the user editing in the Access Manager module (see Going to user editing).
In the advanced options tab, select the Hikvision Extention option and click the button. The Hikvision Extended User Options window opens.
Note.
If the Hikvision extention parameter is not displayed, enable it for user accounts (Configuring fields displaying in user accounts).
Select the desired controller from the object tree in the Hikvision Extended User Options window.
Check the First Card box (1) if you need to activate all readers connected to this controller by the first card swipe through any of the readers.

From the Card Type drop-down list (2), select the card type:

Invalid	Invalid card
Ordinary card	Normal card
Disabled card	Swiping this type of card prevents the door from locking for a time interval specified by the Unlock Time for Disabled Pass parameter (see Configuring the Hikvision door).
Blacklist card	When a blacklisted card is swiped, a system event is generated without granting access
Patrol card	This type of cards can be used by supervisors
Stress card	If a user is under duress, this card opens the door and generates a duress alarm
Super card	This card opens all doors of a given controller within a time zone defined by user's access level
Visitor card	The map is intended for visitors. You can set the maximum number of swipes for this card in the Max Swipe Times field (see step 6).

Set a limit for a number of Visitor card swipes in the Max Swipe Times field (3).
Note.
The maximum number of swipes must be in the range from 0 to 255. The 0 value means that there are no restrictions on the number of swipes.
Specify a card's password in the Auth. Pass field (4). The password consists of 4 to 8 digits.
Check the boxes for the required card groups in the (5) field.
Click the Apply button (6) to save the changes.

The Hikvision user cards are now configured.

Page tree