The Radar setup procedure

To set up a speed-trap device in Auto-Intellect, the Speed-trap server system object should be created and set up.

The Speed-trap server object setup includes the following steps:

1. Set up the connection between the Speed-trap device and the Auto-Intellect software package.
2. Select a camera for the joint operation of the Radar and Auto-Uragan, CARMEN-Auto or VIT modules.
3. Specify the speed limit.
4. Setting the permitted vehicle speed for displaying in the report concerning the recognized number.
5. Select the Speed-trap device model and settings.
6. Select the vehicle movement direction relative to the Speed-trap, needed to determine the vehicle speed.
7. Specify the distance between the speed-trap and the vehicle position at the moment of speed detection.
8. Set up additional parameters related to joint operation of the speed-trap device and the Radar module.
9. Specify the minimum vehicle speed to be detected by the speed-trap.

These steps are described in more detail in the following sections.