Configuring the SIP Panel interface object

The SIP Panel interface object is used to work with SIP-devices in Intellect. For details about configuring these devices, see Configuring SIP-devices.

The SIP Panel is configured as follows:

1. Create a SIP Panel object based on the Display object on the Interfaces tab of the System Settings dialog box (1).
   
2. Set the coordinates of the upper left corner of the interface window in the X and Y fields (2).
3. Set the width and height of the interface window in the W and H fields (3).
4. From the Monitor drop-down list (4), select the computer monitor on which the interface window will be displayed.
5. From the Terminal drop-down list (5), select the SIP-terminal object which SIP-devices use the SIP Panel.
6. From the Monitor drop-down list (6), select the Monitor object corresponding to the Video Surveillance Monitor to which the video cameras associated with the corresponding SIP-devices are added. For details, see Selecting and configuring video cameras.
7. If it is necessary to display the SIP Panel only during a call, set the Display only when calling checkbox (7).
8. If new calls should be added to the end of the list on the SIP panel, select the New calls to end check box (8). By default, new calls are added to the top of the list.
   
9. To turn off sound when pressing keys on the SIP panel, select the Mute keypress sound check box (9).
10. Click Apply (10).

The SIP Panel is configured.