The Settings panel of the SIP-terminal object

The settings panel of the SIP-terminal object is shown in the pictures below.

Table describes the parameters of the SIP-terminal settings panel.

№	Parameter	Method for setting the parameter value	Description	Presented as	Default value	Range of values
1	The Identification number field	Automatically	Shows the identification number of the SIP-terminal object in the system.	Sequence of numbers	-	Depends on the number of the SIP-terminal objects in the system.
2	The Name field	Enter the value in the field	Assigns a name to the SIP-terminal object in the system.	Latin, Cyrillic letters and service characters	SIP-terminal	A line representing a sequence of any symbols (letters, digits, service characters apart from > and < symbols), not case-sensitive. Number of symbols – from 1 to 60.
3	The Disable checkbox	Is set with a checkbox	Shows the status (enabled or disabled) of the SIP-terminal object in the system.	Boolean type	-	Yes – the SIP-terminal object is disabled and is not in use. No – the SIP-terminal object is enabled and is in use.
4	The Computer dropdown list	Is selected in the list	Assigns the parent Computer object for the SIP-terminal object.	Name of the Computer objects registered in the system.	Name of the parent Computer object	Depends on the number of the Computer objects in the system.
5	The Terminal type switch	Set switch to the required position	Sets the SIP terminal type	Supported SIP terminal types	Peer-to-peer	SIP client — the SIP-terminal acts as a client, it can be connected to any SIP-server SIP server — the SIP-terminal acts as a server, any SIP-clients can be connected to it Peer-to-peer terminal type is not supported at the present moment.
The Basic settings group
6	The Network drop-down list	Is selected in the list	For SIP-server terminal type only Sets the IP address of the network adapter that will be used to connect to the network where the SIP-clients are located.	IP-address	Default network adapter	The list of available network adapters
7	The SIP port field	Enter the value in the field	For SIP-server terminal type only Sets the port number which will receive the data from the SIP-clients	Integer	5060	0-65535
8	The SIP transport drop-down list	Is selected in the list	For SIP-server terminal type only Sets the transport level protocol to be used.	Supported transport level protocols	UDP	TCP UDP
9	The RTP ports range, from and to fields	Enter the value in the field	For SIP-server terminal type only Sets RTP ports range	Integer	from: 40000 to: 64000	0-65535
10	The Address field	Enter the value in the field	For SIP-client terminal type only Sets the IP address of the SIP server	IP-address	-	1.0.0.0 - 255.255.255.255
11	The Port field	Enter the value in the field	For SIP-client terminal type only Sets the port for the SIP server connection	Integer	-	0-65535
The Advanced settings tab (for SIP-server only)
12	The Subscriber field	Enter the value in the field	Sets the SIP server special number	Integer	-	>=0
13	The Name field	Enter the value in the field	Sets the name of the special number	Latin, Cyrillic letters and service characters	-	A line representing a sequence of any symbols
The Numbers settings tab (for SIP-server only)
14	The Subscriber column	Automatically	Lists the numbers of all devices and operators registered on the SIP-terminal, as well as special numbers.	-	-	-
15	The Name field	Automatically	Lists the names of the corresponding devices, operators, and special numbers.	-	-	-
16	The Redirecting field	Enter the value in the field	Sets the number to which the corresponding subscriber's calls should be forwarded to.	Integer	-	Numbers of all devices and operators registered on the SIP-terminal, as well as special numbers.
17	The Pending, sec field	Enter the value in the field	Sets the time period in seconds, during which it is necessary to wait for a response from the subscriber.	Integer	-	>0
18	The Run macro drop-down list	Is selected in the list	Sets the Macro object which should be run when calling the subscribe.	Name of the Macro objects registered in the system.	-	Depends on the number of the Macro objects in the system.
19	The Calling number multicast (video) field	Enter the value in the field	Sets the IP address for broadcasting the video stream from the calling device in the multicast mode.	IP-address	-	1.0.0.0 - 255.255.255.255
20	The Calling number multicast (sound) field	Enter the value in the field	Sets the IP address for broadcasting the audio stream from the calling device in the multicast mode.	IP-address	-	1.0.0.0 - 255.255.255.255
21	The Destination number multicast (video) field	Enter the value in the field	Sets the IP address for broadcasting the video stream from the destination device in the multicast mode.	IP-address	-	1.0.0.0 - 255.255.255.255
22	The Destination number multicast (sound) field	Enter the value in the field	Sets the IP address for broadcasting the audio stream from the destination device in the multicast mode.	IP-address	-	1.0.0.0 - 255.255.255.255

Page tree

Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.