Previous page Next page


You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

List of user access cards is displayed in the User card table of the Editing. <Full name> (ID) window.

The object code is specified in brackets, then the card code follows.

It is possible to assign multiple access cards to a user.

Attention!

Assigning multiple access cards to a user should be supported by hardware and by the corresponding integration module. If used hardware/integration module supports only one card, and multiple cards are assigned to a used, then all cards excepting the first card will be ignored by system.

Support for multiple user access cards has been tested in the following integration modules: Noder, ApolloSDK v.2, SDK Orion v.2, PERCo-S-20, PERCo-S-20 v.2, AccessNet (ABC), Forteza, ParsecNet 3. For information on others integration modules, please contact the AxxonSoft technical support.

Input of card number and code while assigning access cards to a user can be performed in one of the following ways:

  1. Manually.
  2. Using the control reader.

Note

 List of control readers used for user access cards input is specified while system configuring - see the Configuring a control readers in the Access Manager section.

  • No labels
Error formatting macro: children: java.lang.NullPointerException