Go to documentation repository
Previous page Next page
You can configure the Hikvision alarm input via the Hikvision 26X Alarm input and Hikvision K1T605XF Alarm input objects configuration panel, which are created on the basis of the Hikvision 26X and Hikvision K1T605XF objects manually or automatically after reading the configuration from the corresponding controller (see Network settings of the Hikvision controller and Configuring the Hikvision controller). As an example of configuring the Hikvision alarm input, let's consider a Hikvision 26X controller.
To configure the Hikvision alarm input, do the following:
- Go to the Hikvision 26X Alarm input object's settings panel.
- In the Number drop-down list (1), you see the alarm input's ID number corresponding to its ID in the Hikvision controller. You can not change this value.
- In the Zone name field (2), enter the alarm input name under which it will further appear in the Intellect PSIM.
Select a detector type from the Detector type drop-down list (3):
Emergency Switch Emergency switch sensor Door Magnetic Door Magnetic Smoke Smoke sensor Active Infrared Active infrared sensor Passive Infrared Passive infrared sensor Glass Break Glass break sensor Vibration Vibration sensor Dual Tech.PIR Dual technology PIR sensor Dual technology PIR sensor Triple technology PIR sensor Humidity Humidity sensor Temperature Temperature sensor Combustible Gas Flammable gas sensor Other Detector Other type of sensor Select a zone type from the Zone type drop-down list (4):
Instant Instant zone 24 Hours Permanently controlled zone Door Emg. open Open emergency door zone
Door Emg. shutdown Inactive emergency door zone Shield Zone Protected zone From the Sensivity drop-down list (5), select a sensivity value in milliseconds: 10ms, 250ms, 500ms, 750ms.
- Click the Apply button (6).
The Hikvision alarm input is now configured.