Adding the Suprema 2 face template

To add a Suprema 2 face template in the Access Manager module, do the following:

1. Go to adding biometric data in the Access Manager window (see Adding biometric parameters).
2. Select the extension (Edit Face) Suprema 2 Host that corresponds to the controller with the biometric face reader connected to it, or to the terminal.
3. The Suprema. Capture face dialog box will open. To add a new face template, click the Add button.
   
   The Suprema. Capture face window will open.
   
   

4. From the Threshold drop-down list (1), select the sensitivity for capturing a face image: from 0 (low) to 8 (maximum).

5. To start capturing, click the Start Image button (2) and then follow the instructions displayed at the top of the Suprema. Capture face window. In case of successful face capture, the resulting photo will be displayed, and the template of this photo will be saved.

6. Click OK to complete adding a face template.

7. To delete a face template, select it in the list of templates and click the Remove button.

   Note

   To delete all face templates, click the Remove all button.

8. Click OK to save the face template.

The Suprema 2 face template is added.