The Settings panel of the SIP-device object

The settings panel of the SIP-device object is shown in the pictures below.

№	Parameter	Method for setting the parameter value	Description	Presented as	Default value	Range of values
The Connection settings group
1	The User ID field	Enter the value in the field	Sets the SIP-device identification number, i.e. the number to call it.	Integer		>=0
2	The IP address field	Enter the value in the field	For SIP-server terminal type only Sets the SIP-device IP address.	IP address		1.0.0.0 - 255.255.255.255
3	The Password field	Enter the value in the field	For SIP-server terminal type only Sets the password specified on the SIP-device.	Latin, Cyrillic letters and service characters		A line representing a sequence of any symbols
4	The State field	Automatically	For SIP-server terminal type only Displays the SIP device state	-	-	-
5	The Device type drop-down list	Is selected in the list	Sets the icon type to represent the device on the Map.	Names of the available icon types	-	SIP client — the SIP-device acts as a client, it can be connected to any SIP-server SIP server — the SIP-device acts as a server, any SIP-clients can be connected to it Peer-to-peer terminal type is not supported at the present moment.
6	The Device priority drop-down list	Is selected in the list	Sets the device calls priority when displayed on the SIP panel	Integer	-	0 – 10 The higher the number the higher the priority. If the field left empty, the priority is considered minimal.

Table describes the parameters of the SIP-device settings panel.

№	Parameter	Method for setting the parameter value	Description	Presented as	Default value	Range of values
The Video/Audio tab (for SIP-server terminal type only)
1	The Video switch	Set the switch to the required position	Sets the video camera used for calls	Supported options of camera usage	Off	Off — the video is not used during the call. SIP camera — a SIP-device camera connected via the SIP protocol is used. Other — any other camera from the Intellect hardware tree selected from the Camera drop-down list is used.
2	The Camera drop-down list	Is selected in the list	Sets any video camera used for calls	Name of the Camera objects registered in the system.	-	Depends on the number of the Camers objects in the system.
3	The Audio switch	Set the switch to the required position	Sets the microphone used for calls	Supported options of audio usage	Off	Off — the audio is not used during the call. On — the microphone of the SIP-device is used.
4	The Microphone field	Automatically	Displays the name of the Microphone object corresponding to the SIP device	-	-	-

Table describes the parameters of the SIP-device settings panel.

№	Parameter	Method for setting the parameter value	Description	Presented as	Default value	Range of values
1	The DTMF type drop-down list	Is selected in the list	Sets the type of the tone DTMF command	Supported signal type	in_bound	in_band – the signal is transmitted as normal sound in an audio stream. rtp_nte – signals are transmitted via RTP separately from the voice stream. sip_info – signals are transmitted in the SIP INFO message. sip_notify – signals are transmitted in the SIP NOTIFY message.
2	The Signal duration, ms field	Enter the value in the field	Sets the time period in milliseconds during which the command is to be sent.	Integer		>0
4	The Name field	Enter the value in the field	Sets the name of the command displayed on the SIP panel	Latin, Cyrillic letters and service characters		A line representing a sequence of any symbols
3


5	The Code field	Enter the value in the field	Sets the unique command code	Integer		>0

Page tree