Specifics of Summary widget configuration

Configure the Summary widget as follows:

1. Configure general parameters (see General widget settings).

2. Select the field that will be in the table rows (1).

3. Select the field that will be in the table columns (2).

4. Select the field to be analyzed (3).

5. If non-numeric fields are selected, then in the Value op field, select count (4) - the number of events will be counted. If a numeric field is selected, then you can select the sum, average, minimum and maximum value.

   Note

   In the example on the image above, the summary table will display the number of events for each detection tool of each video camera.

6. If the summary table has many columns and you need to freeze the first column when scrolling through it, activate the Fixed 1 column parameter (5).

7. If necessary, configure the column with the difference in the values ​​of other columns. To do this:

   1. Activate the Delta column parameter (6).

   2. Enter the column name (7).

   3. To display only this column in the table, set the Hide others checkbox (8).

   4. In lists A and B, select the columns, between the values ​​of which you want to calculate the difference (9).

8. To highlight a row in red when the specified conditions are met, do the following:

   1. Activate the Highlight row if parameter (10).

   2. Select the column which value will be compared with the reference value (11).

   3. Select the operation (12).

   4. Set the reference value (13).

      Note

      In the example on the image above, the row will be highlighted in red if the number of events from the face detection tool is strictly more than 42,000.

9. Click Save.