Configuring virtual access point during vehicle license plate recognition

Organizing of virtual access point during vehicle license plate recognition allows fixing the access (ACCESS_IN event) while recognition the license plate which is stored in the database (in user settings specified in the Access Manager module).

To configure the virtual access point during vehicle license plate recognition, do the following:

1. Create the Virtual access server object on the basis of the Computer object in the Hardware tab of the System settings dialog window.
   
2. Create the AUTO access point object on the basis of the Virtual access server object.
   
3. Configure the access point:
   
4. Select the LPR channel on the basis of which the access point is to be organized (1).
5. From the Entrance to drop-down list select the Region object corresponding to the area in which access is performed (2).
6. From the Exit from drop-down list select the Region object corresponding to the area from which the exit is performed (3).
7. From the Control drop-down list (4) select the access granting mode:
   
   • Server decides - automatically (this includes the use of a script).
   • Operator decides - by approval from an operator, who has to click the button in the Event manager (see Working with the Event manager module). 
      
     
     • In the Timeout field specify the access granting timeout in seconds. All the other requests from the number plate recognition server will be ignored within the specified timeout.
8. From the Mode drop-down list (5) select the access granting mode: automatically (this includes the use of a script that controls the door sensors) or by approval from an operator, who has to click the button in the Event manager (see Working with the Event manager module).
   

   • Select the Recognition only mode if it’s required to take a decision about access granting only with reference to license plates recognition.

   • Select the Rights checking mode and set check boxes corresponding to checking which are to be performed if it is required to check the user access level to which the vehicle belongs, time zones of this access level and perform additional checking.

     

     • In the Start date and Expiry date section select a radio button corresponding to the settings of checking the card validity date specified in the Access Manager interface object (8).

       • Do not check – checking of card validity date is not required.

       • Not included – do not include the card expire date to checking.

       • Included – include the card expire date to checking.

       • Check blocking – access will not granted in case of user is locked.

       • Antipassback checking – antipassback checking through the access point.

9. Click Apply (6) to save the changes.

Organizing of virtual access point during vehicle license plate recognition is performed.