Configuring the image

Configure the image as follows:

1. On the Logic tab, select the required element in the table and click the Edit button.
   
2. If necessary, in the Label field (1), enter the text that will be displayed in the column to the left opposite the element.
   
3. If necessary, in the Image field (2), enter the path to the image on the disk. If the path is not specified, the frame from the video camera will be used.
4. In the Label text field (3), enter the text that will be displayed on the button.
5. In the Default transition field (4), select the element that should be displayed after clicking on the button (4).
6. If it is necessary to execute a macro command by clicking the button, select it from the Macro list (5).
7. Click OK.