Documentation for Axxonsoft Platform Calculator. Documentation for other products available here.

Previous page Next page


You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

The following Axxon Next x64 detection tools grouped by tabs are available for selection.

Base tab

Name

Description

Motion Detection (CPU, 20fps)

Base motion detection tool.

The frame rate specified during the detection tool configuration (the Frames processed per second parameter) is indicated in brackets. This is the number of fps processed by the module; the frame rate of the incoming video stream is usually higher.

Motion Detection (GPU, 20fps)

Base motion detection tool when using the GPU resources. In this case, the GPU decoder operation mode was used.

The frame rate specified during the detection tool configuration (the Frames processed per second parameter) is indicated in brackets. This is the number of fps processed by the module; the frame rate of the incoming video stream is usually higher.

The models and the number of GPUs are selected separately using the information on the GPU performance for Axxon Next detection tools page.

Motion Detection (key frames)

Base motion detection tool with the Decode key frames option enabled. The detection tool is applicable only for H.264, H.265 codecs. The platform is calculated for decoding by key frames if the GOP=25 (every 25th frame is the key frame).

Service Detection (key frames)

Service detection tools:

  • Quality degradation.
  • Blurred Image Detection.
  • Compression Artifacts Detection.
  • Image Noise Detection.
  • Scene change.

The platform is calculated for one service detection tool (any of the listed).

The detection tool is applicable only for H.264, H.265 codecs. The platform is calculated for decoding by key frames if the GOP=25 (every 25th frame is the key frame).

Tracker tab

Name

Description
Tracker VMDA

Scene analytics detection tools (VMDA) based on object tracker.

The results are given for the object tracker with 1 active sub detection tool Motion in area.

AI tracker with neural filter (GPU)

Scene analytics detection tools (VMDA) based on object tracker with use of a neural filter and GPU resources. In this case, the CPU decoder operation mode was used.

The models and the number of GPUs are selected separately using the information on the GPU performance for Axxon Next detection tools page.

AI Neural tracker (CPU, 6fps)

Scene analytics detection tools based on neural tracker with use of CPU resources.

The frame rate specified during the Neurotracker object configuration (the Frames processed per second parameter) is indicated in brackets. This is the number of fps processed by the module; the frame rate of the incoming video stream is usually higher.

The results are given for a standard size neural network*.
AI Neural tracker (VPU, 6fps)

Scene analytics detection tools based on neural tracker with use of VPU resources. In this case, the CPU decoder operation mode was used.

The frame rate specified during the Neurotracker object configuration (the Frames processed per second parameter) is indicated in brackets. This is the number of fps processed by the module; the frame rate of the incoming video stream is usually higher.

The models and the number of VPUs are selected separately using the information on the VPU performance for Axxon Next detection tools page.

The results are given for a standard size neural network*.

AI Neural tracker (GPU, 6fps)

Scene analytics detection tools based on neural tracker with use of GPU resources. In this case, the GPU decoder operation mode was used.

The frame rate specified during the Neurotracker object configuration (the Frames processed per second parameter) is indicated in brackets. This is the number of fps processed by the module; the frame rate of the incoming video stream is usually higher.

The models and the number of GPUs are selected separately using the information on the GPU performance for Axxon Next detection tools page.

The results are given for a standard size neural network*.

The results are given for a neural tracker with 1 active sub detection tool Motion in area.

AI Neural tracker, enhanced accuracy (GPU, 6fps)

Scene analytics detection tools based on neural tracker with use of GPU resources and high-precision neural network. In this case, the GPU decoder operation mode was used.

The frame rate specified during the Neurotracker object configuration (the Frames processed per second parameter) is indicated in brackets. This is the number of fps processed by the module; the frame rate of the incoming video stream is usually higher.

The models and the number of GPUs are selected separately using the information on the GPU performance for Axxon Next detection tools page.

The results are given for a standard size neural network*.

The results are given for a neural tracker with 1 active sub detection tool Motion in area.

LPR&Traffic tab

Name

Description
License plate recognition (VT)

License plate recognition (VT) detection tool.

Face tab

Name

Description
Face detection tool

Face detection tool.

Fire&Smoke tab

Name

Description

Fire detection tool (CPU, 0.1fps)

Smoke detection tool (CPU, 0.1fps)

Fire and smoke detection tools based on neural network with use of CPU resources.

The frame rate specified during the detection tool configuration (the Frames processed per second parameter) is indicated in brackets. This is the number of fps processed by the module; the frame rate of the incoming video stream is usually higher.

Behavior analytics tab

Name

Description
AI Pose detection (CPU, 3fps)

Pose detection tools based on neural network with use of CPU resources.

The frame rate specified during the detection tool configuration (the Frames processed per second parameter) is indicated in brackets. This is the number of fps processed by the module; the frame rate of the incoming video stream is usually higher.

The number of specific pose detection tools created under the head Pose detection object does not affect the calculation results (except for the Close-standing people detection; to calculate the result with this detection tool, please contact the AxxonSoft support).

AI Pose detection (VPU, 3fps)

Pose detection tools based on neural network with use of VPU resources. In this case, the CPU decoder operation mode was used.

The frame rate specified during the detection tool configuration (the Frames processed per second parameter) is indicated in brackets. This is the number of fps processed by the module; the frame rate of the incoming video stream is usually higher.

The number of specific pose detection tools created under the head Pose detection object does not affect the calculation results (except for the Close-standing people detection; to calculate the result with this detection tool, please contact the AxxonSoft support).

The models and the number of VPUs are selected separately using the information on the VPU performance for Axxon Next detection tools page.

The results are given for the standard neural network included in the Axxon Next distribution.

Equipment detection (CPU, 1fps)

Personal protection equipment (PPE) detection tools based on neural network with use of CPU resources. In this case, the CPU decoder operation mode was used.

The frame rate specified during the detection tool configuration (the Frames processed per second parameter) is indicated in brackets. This is the number of fps processed by the module; the frame rate of the incoming video stream is usually higher.

The results are given for a detection tool with 5 classification nets operating simultaneously when determining equipment on each body part (head, torso, hands, legs, feet) in a gateway: at the entrance to the area in which the equipment is required, an employee lingers for 5-10 seconds during which the detection tool determines the presence of the necessary equipment.

Equipment detection (VPU, 1fps)

Personal protection equipment (PPE) detection tools based on neural network with use of VPU resources.

The frame rate specified during the detection tool configuration (the Frames processed per second parameter) is indicated in brackets. This is the number of fps processed by the module; the frame rate of the incoming video stream is usually higher.

The results are given for a detection tool with 5 classification nets operating simultaneously when determining equipment on each body part (head, torso, hands, legs, feet) in a gateway: at the entrance to the area in which the equipment is required, an employee lingers for 5-10 seconds during which the detection tool determines the presence of the necessary equipment.

The models and the number of VPUs are selected separately using the information on the VPU performance for Axxon Next detection tools page.

If you use VPU, please note that due to the peculiarities of the device, only the segmentation neural network will be processed on it, and the CPU will be involved in the operation of the classification neural networks.


Note

* – The results are given for a neural network capable of detecting an object sized at least 5% of the frame width/height. The results may differ for a neural network capable of detecting smaller objects (since more resources are required).

  • No labels