Documentation for Face Intellect 8.0-8.1. Documentation for other versions of Intellect is available too.
Previous page Next page
To configure the Face Recognition Server operation with a thermal camera or an external system, do the following:
- Create and configure an embedded detector in Intellect for the thermal camera, from which it is necessary to receive the temperature and photo of a captured face (see Embedded detectors).
- Configure the Face detection module operation with a thermal camera (see Configuring the Face detection module combined work with thermal camera or external system).
- Go to the Analytics tab on the settings panel of the Face Recognition Server object.
- In the Threshold field (1), enter the temperature in degrees Celsius; when this value is exceeded, the Temperature rise (TEMPERATURE_ALARM) event will be generated.
- Click the Apply button (2).
Configuring the Face Recognition Server operation with the thermal camera is now complete.
Note
When the debug mode is enabled (see Selecting and enabling the debug mode of Intellect software), a log file firserver.thermal_imager.log will be created in the <Intellect installation directory>\. All information received from the thermal camera is logged into this file.
Also, you can enable saving json and images received from the thermal camera during face recognition to the folder using the SaveThermalJson registry key (for details, see Registry keys reference guide).
Overview
Content Tools